Docker Desktop for Mac Edge release notes

This page contains information about Docker Desktop Edge releases. Edge releases give you early access to our newest features. Note that some of the features may be experimental, and some of them may not ever reach the Stable release.

For Docker Desktop system requirements, see What to know before you install.

Docker Desktop Community 2.5.4

2020-12-07

Upgrades

Bug fixes and minor changes

Docker Desktop Community 2.5.3

2020-11-30

Upgrades

Bug fixes and minor changes

  • Fixed a possible file sharing error where a file may appear to have the wrong size in a container when it is modified on the host. This is a partial fix for docker/for-mac#4999.
  • Removed unnecessary log messages which slow down filesystem event injection.

Docker Desktop Community 2.5.2

2020-11-26

New

  • Use of three digit version number.
  • Starting with Docker Desktop 2.5.2, updates will be much smaller as they will be applied using delta patches.

Bug fixes and minor changes

  • Re-enabled the experimental SOCKS proxy. Fixes docker/for-mac#5048.
  • Fixed an unexpected EOF error when trying to start a non-existing container with -v /var/run/docker.sock:. See docker/for-mac#5025.
  • Display an error message instead of crashing when the application needs write access on specific directories. See docker/for-mac#5068

Docker Desktop Community 2.5.1.0

2020-11-18

This release contains a Kubernetes upgrade. Note that your local Kubernetes cluster will be reset after installing Docker Desktop.

Upgrades

Bug fixes and minor changes

Docker Desktop Community 2.4.2.0

2020-10-19

New

Upgrades

Bug fixes and minor changes

  • When sharing Linux directories (/var, /bin, etc) with containers, Docker Desktop avoids watching paths in the host file system.
  • When sharing a file into a container (e.g. docker run -v ~/.gitconfig) Docker Desktop does not watch the parent directory. Fixes docker/for-mac#4981.
  • gRPC FUSE: fix chown when the file is read-only. Fixes rabbitmq, see docker/for-mac#4964.
  • gRPC FUSE: generate ATTRIB inotify events as well as MODIFY. Fixes docker/for-mac#4962.
  • gRPC FUSE: return EOPNOTSUPP from fallocate for unsupported modes. Fixes minio. See docker/for-mac#4964.
  • Fixed an issue related to NFS mounting. See docker/for-mac#4958.
  • Always flush file system caches synchronously on container start. See docker/for-mac#4943.
  • Allow symlinks to point outside of shared volumes. Fixes docker/for-mac#4862.
  • Diagnostics: avoid hanging when Kubernetes is in a broken state.
  • Fixed automatic start on log in. See docker/for-mac#4877 and docker/for-mac#4890.

Docker Desktop Community 2.4.1.0

2020-10-01

Upgrades

Bug fixes and minor changes

  • Docker Desktop always flushes filesystem caches synchronously on container start. See docker/for-mac#4943.
  • Docker Desktop now supports S_ISUID, S_ISGID and S_ISVTX in calls to chmod(2) on shared filesystems. See docker/for-mac#4943.
  • Fixed a possible premature file handle close when using gRPC-FUSE.

Docker Desktop Community 2.3.7.0

2020-09-17

New

Upgrades

Bug fixes and minor changes

  • Fixed automatic start on log in. See docker/for-mac#4877 and docker/for-mac#4890.
  • Docker Desktop now allows symlinks to point outside of shared volumes. Fixes docker/for-mac#4862.
  • Removed an artificial file descriptor limit (setrlimit) of 10240. Docker Desktop now relies on the kernel to impose limits via kern.maxfiles and kern.maxfilesperproc.
  • Fixed the VM debug shell used for low-level debugging.
  • Fixed compatibility with Go 1.15 clients. See docker/for-mac#4855.
  • Avoid exposing /host_mnt paths in docker container inspect and docker volume inspect. Fixes docker/for-mac#4859.
  • Fixed container logs lagging under heavy load. See docker/for-win#8216.

Known issues

  • The clock_gettime64 system call returns EPERM rather than ENOSYS in i386 images. To work around this issue, disable seccomp by using the --privileged flag. See docker/for-win#8326.

Docker Desktop Community 2.3.6.1

2020-09-08

Upgrades

Bug fixes and minor changes

  • Docker Desktop now correctly displays the state of "Use gRPC FUSE for file sharing" in the UI. Fixes docker/for-mac#4864.

Docker Desktop Community 2.3.6.0

2020-09-01

New

  • In partnership with Snyk, Docker Desktop launches vulnerability scanning for Docker local images.
  • Docker ECS plugin has been replaced by ECS cloud integration
  • Docker UI:
    • The Images view now has search and filter options.
    • You can now push an image to Docker Hub using the Remote repositories drop-down menu.
  • WSL 2 files and directories can now be mounted from the Windows Docker CLI with e.g. docker run -v \\wsl$\Ubuntu\my-files:/my-files ....

Removal

  • Support for MacOS 10.13 has ended, you will need to update your system to keep using Docker Desktop.

Upgrades

Bug fixes and minor changes

  • Fixed a Mac CPU usage bug by removing the serial console from hyperkit, see docker/roadmap#12. To open a shell in the VM use either nc -U ~/Library/Containers/com.docker.docker/Data/debug-shell.sock (on Mac) or putty -serial \\.\pipe\dockerDebugShell (on Windows).

Docker Desktop Community 2.3.5.0

2020-08-21

New

  • The Images view on the Dashboard now allows you to interact with images on Docker Hub. You can now pull a remote repository with specific tags from Docker Hub, or view the details of the repository on the Docker Hub page. To access the new Images view, from the Docker menu, select Dashboard > Images.

  • Docker Desktop now enables BuildKit by default after a reset to factory defaults. To revert to the old docker build experience, go to Preferences > Docker Engine and then disable the BuildKit feature.

  • Docker Desktop now uses gRPC-FUSE for file sharing by default. This has much faster file sharing and uses much less CPU than osxfs, especially when there are lots of file events on the host. To switch back to osxfs, go to Preferences > General and disable gRPC-FUSE.

Upgrades

Removal

  • The Mutagen file sync feature that we have been experimenting with in recent Edge releases has been removed. Thanks to everyone who has provided feedback on this feature. We are reconsidering how to integrate it based on the feedback we have received so far.

Bug fixes and minor changes

  • Moved Dashboard to the top of the whale menu.
  • Improved the error handling when dockerd crashes.
  • Fixed minor bugs in the Images view.

Docker Desktop Community 2.3.4.0

2020-07-28

New

  • Docker Desktop introduces the new Images view to the Docker Dashboard. The Images view allows users to view a list of Docker images on the disk, run an image as a container, pull the latest version of an image from Docker Hub, inspect images, and remove any unwanted images from the disk.

    To access the new Images view, from the Docker menu, select Dashboard > Images.

Upgrades

Bug fixes and minor changes

  • Copying the container logs from the dashboard does not copy the ANSI color codes to the clipboard anymore.
  • Mutagen two-way sync now uses .dockersyncignore rather than .dockerignore to exclude files.

Docker Desktop Community 2.3.3.2

2020-07-21

Upgrades

Bug fixes and minor changes

  • Mutagen uses the .dockerignore file when creating a session to filter the list of synchronized files. See docker/for-mac#4621.
  • Docker CLI commands can now bypass any active Mutagen synchronization for volumes using :cached. See docker/for-mac#1592.

Docker Desktop Community 2.3.3.0

2020-07-09

Upgrades

Bug fixes and minor changes

  • Compose-on-Kubernetes is no longer included in the Docker Desktop installer. You can download it separately from the compose-on-kubernetes release page.
  • Fixed an incompatibility between hyperkit and osquery which resulted in excessive hyperkit CPU usage. See docker/for-mac#3499
  • Docker Desktop now respects consistency flags cached, delegated, consistent even when in a list of options (for example, z,delegated). See docker/for-mac#4718.
  • Docker Desktop now implements the shared volume flag :delegated by automatically setting up a two-way file sync with Mutagen.

Docker Desktop Community 2.3.2.0

2020-06-25

Upgrades

Bug fixes and minor changes

  • Fixed an issue with startup when the Kubernetes certificates have expired. See docker/for-mac#4594.
  • Fixed hyperkit on newer Macs / newer versions of Hypervisor.framework.
  • Added support for the global Mutagen config file ~/.mutagen.yml.
  • Automatically set up a two-way file sync using :delegated option with docker run -v command.
  • Re-added device-mapper to the embedded Linux kernel. See docker/for-mac#4549.
  • Improved diagnostics when using two-way synchronization with the Mutagen cache.
  • Switched to Mutagen posix-raw symlink mode which fixes cases where the symlinks point outside the synchronized directory. See docker/for-mac#4595.
  • Removed the legacy Kubernetes context docker-for-desktop. The context docker-desktop should be used instead. See docker/for-mac#4089.

Docker Desktop Community 2.3.1.0

2020-05-20

New

Docker Desktop introduces a directory caching mechanism to greatly improve disk performance in containers. This feature uses mutagen.io to sync files between the host and the containers and benefits from native disk performance.

We appreciate you trying out an early version of the Mutagen file sync feature. Please let us know your feedback by creating an issue in the Docker Desktop for Mac GitHub repository with the Mutagen label.

Upgrades

Bug fixes and minor changes

  • Fixed a performance regression when using shared volumes in 2.2.0.5. Fixes docker/for-mac#4423.
  • Fixed containers logs in Docker Desktop Dashboard which were sometimes truncated. Fixes docker/for-win#5954.

Docker Desktop Community 2.3.0.1

2020-04-28

Bug fixes and minor changes

  • Fixed a bug that caused starting and stopping of a Compose application from the UI to fail when the path contains whitespace.

Docker Desktop Community 2.3.0.0

2020-04-20

Upgrades

Bug fixes and minor changes

Docker Desktop Edge 2.3.0.0 fixes one issue reported on the docker/for-mac GitHub repository.

  • IPv6 has been re-enabled in the embedded Linux kernel, so listening on IPv6 addresses works again. Fixed docker/for-win#6206 and docker/for-mac#4415.
  • Fixed a bug where containers disappeared from the UI when Kubernetes context is invalid. Fixes docker/for-win#6037.
  • Fixed a file descriptor leak in vpnkit-bridge. Fixes docker/for-win#5841.
  • Added a link to the Stable channel from the Docker Desktop UI.
  • Made the embedded terminal resizable.
  • Fixed bug where diagnostic upload would fail if the username contained spaces.

Docker Desktop Community 2.2.3.0

2020-04-02

Upgrades

New

  • Docker Desktop introduces a new onboarding tutorial upon first startup. The Quick Start tutorial guides users to get started with Docker in a few easy steps. It includes a simple exercise to build an example Docker image, run it as a container, push and save the image to Docker Hub.

Bug fixes and minor changes

Docker Desktop Edge 2.2.3.0 fixes 7 issues reported on the docker/for-mac GitHub repository.

  • Reduced the size of the Docker Desktop installer from 710 MB to 445 MB.
  • Removed dangling /usr/local/bin/docker-machine symlinks which avoids custom installs of docker-machine being accidentally deleted in future upgrades. Note that if you have installed Docker Machine manually, then the install might have followed the symlink and installed Docker Machine in /Applications/Docker.app. In this case, you must manually reinstall Docker Machine after installing this version of Docker Desktop. Fixes docker/for-mac#4208.
  • Fixed a bug where the Docker UI could be started without the engine.
  • Switched from ahci-hd to virtio-blk to avoid an AHCI deadlock, see moby/hyperkit#94 and docker/for-mac#1835.
  • Capturing diagnostics is now faster and easier.
  • Fixed an issue where a container port could not be exposed on a specific host IP. See docker/for-mac#4209.
  • Kubernetes: Persistent volumes created by claims are now stored in the virtual machine. Fixes docker/for-win#5665.
  • Removed port probing from dashboard, just unconditionally showing links to ports that should be available. Fixes docker/for-mac#4264.

Known issues

  • Loopback and unspecified IPv6 addresses (:: and ::1) within a container do not currently work. Some web servers and other programs may be using these addresses in their configuration files.

Docker Desktop Community 2.2.2.0

2020-03-02

This release contains a Kubernetes upgrade. Note that your local Kubernetes cluster will be reset after installing Docker Desktop.

Upgrades

Bug fixes and minor changes

  • Docker Desktop now shares /var/folders by default as it stores per-user temporary files and caches.
  • Ceph support has been removed from Docker Desktop to save disk space.

Docker Desktop Community 2.2.1.0

2020-02-12

Upgrades

Docker Desktop Community 2.1.7.0

2019-12-11

Note

Docker Desktop Edge 2.1.7.0 is the release candidate for the upcoming major Stable release. Please help us test this version before the wider release and report any issues in the docker/for-mac GitHub repository.

Upgrades

Bug fixes and minor changes

  • The Docker Desktop Dashboard now displays port information inline with the container status.
  • Fixed an issue that caused the 'back' button on the Dashboard UI to behave inconsistently when repeatedly switching between the container details and the Settings window.
  • Various minor improvements to the Dashboard UI.
  • Fixed an issue that occurs when sharing overlapping directories.
  • Fixed a bug that prevented users from changing the location of the VM disk image.
  • Docker Desktop does not inject inotify events on directories anymore as these can cause mount points to disappear inside containers. Fixes docker/for-mac#3976.
  • Fixed an issue that caused Docker Desktop to fail on startup when there is an incomplete Kubernetes config file.
  • Fixed an issue where attempts to log into Docker through Docker Desktop could sometimes fail with the Incorrect authentication credentials error. Fixes docker/for-mac#4010.

Docker Desktop Community 2.1.6.0

2019-11-18

Upgrades

New

Added the ability to start and stop Compose-based applications and view combined logs in the Docker Desktop Dashboard UI.

Bug fixes and minor changes

  • Fixed port forwarding when containers are using overlay networks.
  • Fixed a container start error when a container has more than one port with an arbitrary or not-yet-configured external port number. For example, docker run -p 80 -p 443 nginx. Fixes docker/for-win#4935 and docker/compose#6998.

Docker Desktop Community 2.1.5.0

2019-11-04

This release contains a Kubernetes upgrade. Note that your local Kubernetes cluster will be reset after installation.

Upgrades

New

Docker Desktop Dashboard: The new Docker Desktop Dashboard provides a user-friendly interface which enables you to interact with containers and applications, and manage the lifecycle of your applications directly from the UI. In addition, it allows you to access the logs, view container details, and monitor resource utilization to explore the container behavior.

To access the new Dashboard UI, select the Docker menu from the Mac menu bar and then click Dashboard.

Bug fixes and minor changes

Fixed an issue that caused VMs running on older hardware with macOS Catalina to fail on startup with the error processor does not support desired secondary processor-based controls.

Known issues

  • When you start a Docker Compose application and then start a Docker App which has the same name as the Compose application, Docker Desktop displays only one application on the Dashboard. However, when you expand the application, containers that belong to both applications are displayed on the Dashboard.

  • When you deploy a Docker App with multiple containers on Kubernetes, Docker Desktop displays each Pod as an application on the Dashboard.

Docker Desktop Community 2.1.4.0

2019-10-15

Upgrades

Bug fixes and minor changes

  • Improved the navigation in Settings and Troubleshoot UI.
  • Fixed a bug in the UEFI boot menu that sometimes caused Docker Desktop to hang during restart. Fixes docker/for-mac#2655 and docker/for-mac#3921.
  • Docker Desktop now allows users to access the host’s SSH agent inside containers. Fixes docker/for-mac#410
  • Docker Machine is no longer included in the Docker Desktop installer. You can download it separately from the Docker Machine releases page.

Docker Desktop Community 2.1.3.0

2019-09-16

Bug fixes and minor changes

  • All binaries included in Docker Desktop are now notarized so that they can run on macOS Catalina. For more information, see Notarization Requirement for Mac Software.
  • Fixed an issue which caused higher CPU utilization when closing Docker Desktop windows.
  • Added a loading overlay to the Settings and Troubleshoot windows to prevent editing conflicts.
  • Deactivated the Reset Kubernetes button when Kubernetes is not activated.

Docker Desktop Community 2.1.2.0

2019-09-09

Upgrades

Bug fixes and minor changes

  • Reduced the Virtual Machine (VM) startup time.
  • Added support for Expect: 100-continue headers in the Docker API proxy. Some HTTP clients such as curl send this header when the payload is large, for example, when creating containers. Fixes moby/moby#39693.

Docker Desktop Community 2.1.1.0

2019-08-12

Upgrades

Bug fixes and minor changes

  • Docker Desktop now allows users to expose privileged UDP ports. docker/for-mac#3775
  • Added missing fish completions for Docker Compose. docker/for-mac#3795
  • Fixed an issue where running some Docker commands can fail if you are not using Credential Helpers. docker/for-mac#3785
  • Fixed a bug that did not allow users to copy and paste text in the Preferences > Daemon window. docker/for-mac#3798

Docker Desktop Community 2.1.0.0

2019-07-26

This release contains Kubernetes security improvements. Note that your local Kubernetes PKI and cluster will be reset after installation.

Upgrades

New

  • Introduced a new user interface for the Docker Desktop Preferences menu.
  • The Restart, Reset, and Uninstall options are now available on the Troubleshoot menu.

Bug fixes and minor changes

  • Changed the host's Kubernetes context to ensure docker run -v .kube:kube ... kubectl works.
  • Restricted cluster-admin role on local Kubernetes cluster to kube-system namespace.
  • Fixed Kubernetes installation with VPNkit subnet.
  • Reduced the VM startup time. swap is not created every time a virtual machine boots.
  • Fixed a bug where the process output was not redirected to stdout when gathering diagnostics on Windows, which sometimes resulted in a crash.
  • Added /etc/machine-id to the virtual machine. Fixes docker/for-mac#3554.

Docker Community Edition 2.0.5.0 2019-06-12

This is the Edge channel, which gives you early access to our newest features. Be aware that some of them may be experimental, and some of them may not ever reach the Stable release.

This release contains a Kubernetes upgrade. Note that your local Kubernetes cluster will be reset after install.

  • Upgrades

  • New

    • Docker Desktop includes the buildx plugin (currently experimental).
    • Selecting the Experimental features checkbox on the Docker Desktop Preferences Daemon page enables experimental features in the Docker daemon and the Docker CLI.
    • Docker Desktop has improved the reliability of com.docker.osxfs trace performance profiling command.
    • Users can now run the com.docker.osxfs trace --summary option to get a high-level summary of operations, instead of receiving a trace of all operations.
    • Docker Desktop now supports large lists of DNS resource records on Mac. Fixes docker/for-mac#2160

  • Bug fixes and minor changes

    • Docker Desktop does not send DNS queries for docker-desktop.<domain> every 10s. It now relies on the host's DNS domain search order rather than trying to replicate it inside the VM.
    • Docker Desktop has removed the ability to log in using email address as a username as the Docker command line does not support this.
    • Docker Desktop now allows running a Docker registry inside a container. Fixes docker/for-mac#3611
    • Fixed a stability issue with the DNS resolver.

Docker Community Edition 2.0.4.1 2019-05-07

  • Bug fixes and minor changes
    • Upgrade QEMU from 2.8.0 to 3.1.0 to fix an emulation issue when building and running Java applications on Arm64 devices.

Docker Community Edition 2.0.4.0 2019-04-30

  • Upgrades

  • New

    • App: Docker CLI plugin to configure, share, and install applications

      • Extend Compose files with metadata and parameters
      • Reuse the same application across multiple environments (Development/QA/Staging/Production)
      • Multi-orchestrator installation (Swarm or Kubernetes)
      • Push/Pull/Promotion/Signing supported for application, with the same workflow as images
      • Fully CNAB compliant
      • Full support for Docker Contexts

    • Buildx (Tech Preview): Docker CLI plugin for extended build capabilities with BuildKit

      • Familiar UI from docker build
      • Full BuildKit capabilities with container driver
      • Multiple builder instance support
      • Multi-node builds for cross-platform images (out-of-the-box support for linux/arm/v7 and linux/arm64)
      • Concurrent building of Compose files
      • High-level build constructs with bake

  • Bug fixes and minor changes

    • Truncate UDP DNS responses which are over 512 bytes in size

Docker Community Edition 2.0.3.0 2019-03-05

  • Upgrades

  • Bug fixes and minor changes

    • Fixed port 8080 that was used on localhost when starting Kubernetes. Fixes docker/for-mac#3522
    • Error message improvements, do not propose to run diagnostics / reset to factory default when not appropriate.

Docker Community Edition 2.0.2.1 2019-02-15

Docker Community Edition 2.0.2.0 2019-02-06

Docker Community Edition 2.0.1.0 2019-01-11

Edge Releases of 2018

Docker Community Edition 2.0.0.0-mac82 2018-12-07

Docker Community Edition 2.0.0.0-mac77 2018-11-14

  • Upgrades

  • Bug fixes and minor changes

    • Fix appearance in dark mode for OS X 10.14 (Mojave)
    • VPNKit: Improved scalability of port forwarding. Related to docker/for-mac#2841
    • VPNKit: Limit the size of the UDP NAT table. This ensures port forwarding and regular TCP traffic continue even when running very chatty UDP protocols.
    • Ensure Kubernetes can be installed when using a non-default internal IP subnet.

Docker Community Edition 2.0.0.0-beta1-mac75 2018-09-14

  • Upgrades

  • New

    • New version scheme

  • Deprecation

    • Removed support of AUFS
    • Removed support of OS X 10.11

  • Bug fixes and minor changes

    • Fix panic in diagnose

Docker Community Edition 18.06.1-ce-mac74 2018-08-29

  • Upgrades

  • Bug fixes and minor changes

    • Fix local DNS failing to resolve inside containers.

Docker Community Edition 18.06.0-ce-mac69 2018-07-25

Docker Community Edition 18.06.0-ce-rc3-mac68 2018-07-19

Docker Community Edition 18.05.0-ce-mac67 2018-06-07

Docker Community Edition 18.05.0-ce-mac66 2018-05-17

  • Upgrades

  • New

    • Allow orchestrator selection from the UI in the "Kubernetes" pane, to allow "docker stack" commands to deploy to Swarm clusters, even if Kubernetes is enabled in Docker for Mac.

  • Bug fixes and minor changes

    • Use Simple NTP to minimise clock drift between the virtual machine and the host. Fixes docker/for-mac#2076
    • Fix filesystem event notifications for Swarm services and those using the new-style --mount option. Fixes docker/for-mac#2216, docker/for-mac#2375
    • Fix filesystem event delivery to Kubernetes pods when the path to the bind mount is a symlink.
    • Fix a race between calling stat on a file and calling close of a file descriptor referencing the file that could result in the stat failing with EBADF (often presented as "File not found"). Fixes docker/for-mac#2870
    • Do not allow install of Docker for Mac on macOS Yosemite 10.10; this version has not been supported since Docker for Mac 17.09.0.
    • Fix button order in reset dialog windows. Fixes docker/for-mac#2827
    • Diagnostics are run when diagnostics window is displayed; user is prompted to upload them when available.

Docker Community Edition 18.05.0-ce-rc1-mac63 2018-04-26

  • Upgrades

  • New

    • Re-enable raw as the default disk format for users running macOS 10.13.4 and higher. Note this change only takes effect after a "reset to factory defaults" or "remove all data" (from the Whale menu > Preferences > Reset). Related to docker/for-mac#2625

  • Bug fixes and minor changes

Docker Community Edition 18.04.0-ce-mac62 2018-04-12

Docker Community Edition 18.04.0-ce-rc2-mac61 2018-04-09

  • Upgrades

  • New

    • Enable ceph & rbd modules in LinuxKit virtual machine.

  • Bug fixes and minor changes

    • Fix upgrade straight from pre-17.12 versions where Docker for Mac cannot restart once the upgrade has been performed. Fixes docker/for-mac#2739

Docker Community Edition 18.03.0-ce-mac58 2018-03-26

Docker Community Edition 18.03.0-ce-rc4-mac57 2018-03-15

Docker Community Edition 18.03.0-ce-rc3-mac56 2018-03-13

Docker Community Edition 18.03.0-ce-rc1-mac54 2018-02-27

  • Upgrades

  • New

  • Bug fixes and minor changes

    • Revert the default disk format to qcow2 for users running macOS 10.13 (High Sierra). There are confirmed reports of file corruption using the raw format which uses sparse files on APFS. This change only takes effect after a reset to factory defaults (from the Whale menu -> Preferences -> Reset). Related to docker/for-mac#2625
    • DNS name host.docker.internal should be used for host resolution from containers. Older aliases (still valid) are deprecated in favor of this one. (See https://tools.ietf.org/html/draft-west-let-localhost-be-localhost-06).
    • Kubernetes Load balanced services are no longer marked as Pending.
    • Fix hostPath mounts in Kubernetes.
    • Update Compose on Kubernetes to v0.3.0 rc4. Existing Kubernetes stacks will be removed during migration and need to be re-deployed on the cluster.

Docker Community Edition 18.02.0-ce-mac53 2018-02-09

  • Upgrades

  • Bug fixes and minor changes

    • Fix update startup failure in some cases.
    • Fix empty registry added by mistake in some cases in the Preference Daemon Pane. Fixes docker/for-mac#2537
    • Clearer error message when incompatible hardware is detected. Diagnostics are not proposed in the error popup in this case.

Docker Community Edition 18.02.0-ce-rc2-mac51 2018-02-02

Docker Community Edition 18.02.0-ce-rc1-mac50 2018-01-26

Docker Community Edition 18.01.0-ce-mac48 2018-01-19

  • Upgrades

  • New

    • The directory holding the disk images was renamed (from ~/Library/Containers/com.docker.docker/Data/com.docker.driver.amd64-linux to ~/Library/Containers/com.docker.docker/Data/vms/0`).

  • Bug fixes and minor changes

    • Fix error during resize/create Docker.raw disk image in some cases. Fixes docker/for-mac#2383, docker/for-mac#2447, [docker/for-mac#2453], ( https://github.com/docker/for-mac/issues/2453), docker/for-mac#2420
    • Fix additional allocated disk space not available in containers. Fixes docker/for-mac#2449
    • VPNkit port max idle time default restored to 300s. Fixes docker/for-mac#2442
    • Fix using an HTTP proxy with authentication. Fixes docker/for-mac#2386
    • Allow HTTP proxy excludes to be written as .docker.com as well as *.docker.com
    • Allow individual IP addresses to be added to HTTP proxy excludes.
    • Avoid hitting DNS timeouts when querying docker.for.mac.* when the upstream DNS servers are slow or missing.
    • Fix for docker push to an insecure registry. Fixes docker/for-mac#2392
    • Separate internal ports used to proxy HTTP and HTTPS content.
    • If kubectl was already installed before Docker For Mac, restore the existing kubectl when sitching Kubernetes off in Docker for Mac.
    • Migration of Docker Toolbox images is not proposed anymore in Docker For Mac installer (still possible to migrate Toolbox images manually).

Docker Community Edition 17.12.0-ce-mac45 2018-01-05

  • Upgrades

  • New

    • Experimental Kubernetes Support. You can now run a single-node Kubernetes cluster from the "Kubernetes" Pane in Docker For Mac Preferences and use kubectl commands as well as docker commands. See the Kubernetes section
    • DNS name docker.for.mac.host.internal should be used instead of docker.for.mac.localhost (still valid) for host resolution from containers, since since there is an RFC banning the use of subdomains of localhost (See https://tools.ietf.org/html/draft-west-let-localhost-be-localhost-06).

  • Bug fixes and minor changes

    • The docker engine is configured to use VPNKit as an HTTP proxy, fixing 'docker pull' in environments with no DNS. Fixes docker/for-mac#2320

Edge Releases of 2017

Docker Community Edition 17.12.0-ce-rc4-mac44 2017-12-21

Docker Community Edition 17.12.0-ce-rc3-mac43 2017-12-15

Docker Community Edition 17.12.0-ce-rc2-mac41 2017-12-13

  • Upgrades

  • New

  • Bug fixes and minor changes

    • Avoid virtual machine reboot when changing host proxy settings.
    • Don't break HTTP traffic between containers by forwarding them through the external proxy docker/for-mac#981
    • Filesharing settings are now stored in settings.json
    • Daemon restart button has been moved to settings / Reset Tab
    • Display various component versions in About box
    • Better virtual machine state handling and error messages in case of virtual machine crashes

Docker Community Edition 17.11.0-ce-mac40 2017-11-22

Docker Community Edition 17.11.0-ce-rc4-mac39 2017-11-17

  • Upgrades

  • Bug fixes and minor changes

  • New

    • For systems running APFS on SSD on High Sierra, use raw format virtual machine disks by default. This increases disk throughput (from 320MiB/sec to 600MiB/sec in dd on a 2015 MacBook Pro) and disk space handling. Existing disks are kept in qcow format, if you want to switch to raw format you need to "Reset to factory defaults". To query the space usage of the file, use a command like: $ cd ~/Library/Containers/com.docker.docker/Data/com.docker.driver.amd64-linux/ $ ls -ls Docker.raw 3944768 -rw-r--r--@ 1 user staff 68719476736 Nov 16 11:19 Docker.raw The first number (3944768) is the allocated space in blocks; the larger number 68719476736 is the maximum total amount of space the file may consume in future in bytes.

Docker Community Edition 17.11.0-ce-rc3-mac38 2017-11-09

Docker Community Edition 17.11.0-ce-rc2-mac37 2017-11-02

Docker Community Edition 17.10.0-ce-mac36 2017-10-24

Docker Community Edition 17.09.0-ce-mac34 2017-10-06

  • Bug fixes and minor changes
    • Fix Docker For Mac unable to start in some cases : removed use of libgmp sometimes causing the vpnkit process to die.

Docker Community Edition 17.09.0-ce-mac31 2017-09-29

  • Upgrades

  • Bug fixes and minor changes

    • Fix password encoding/decoding. May require to re-login to docker cloud after this version is installed. (Fixes:docker/for-mac#2008, docker/for-mac#2016, docker/for-mac#1919, docker/for-mac#712, docker/for-mac#1220).

Docker Community Edition 17.09.0-ce-rc3-mac30 2017-09-22

Docker Community Edition 17.09.0-ce-rc2-mac29 2017-09-19

  • Upgrades

  • Bug fixes and minor changes

    • Kernel: Enable TASK_XACCT and TASK_IO_ACCOUNTING docker/for-mac#1608
    • Rotate logs in the virtual machine more often

Docker Community Edition 17.09.0-ce-rc1-mac28 2017-09-07

Docker Community Edition 17.07.0-ce-mac26, 2017-09-01

Docker Community Edition 17.07.0-ce-rc4-mac25, 2017-08-24

Upgrades

Bug fixes and minor changes

  • Fixed string validation in daemon options (related to docker/for-mac#1971)
  • VPNKit: Fixed a bug which causes a socket to leak if the corresponding TCP connection is idle for more than five minutes (related to docker/for-mac#1374)

Docker Community Edition 17.07.0-ce-rc3-mac23, 2017-08-21

Upgrades

New

  • VPNKit: Added support for ping!
  • VPNKit: Added slirp/port-max-idle-timeout to allow the timeout to be adjusted or even disabled
  • VPNKit: Bridge mode is default everywhere now

Bug fixes and minor changes

  • VPNKit: Improved the logging around the UNIX domain socket connections
  • VPNKit: Automatically trim whitespace from int or bool database keys

Docker Community Edition 17.07.0-ce-rc2-mac22, 2017-08-11

Upgrades

Docker Community Edition 17.07.0-ce-rc1-mac21, 2017-07-31

Upgrades

New

  • Transparent proxy using macOS system proxies (if defined) directly
  • GUI settings are now stored in ~/Library/Group\ Containers/group.com.docker/settings.json. daemon.json in now a file in ~/.docker/
  • You can now change the default IP address used by Hyperkit if it collides with your network

Bug fixes and minor changes

Docker Community Edition 17.06.1-ce-mac20, 2017-07-18

Upgrades

Docker Community Edition 17.06.0-ce-mac17, 2017-06-28

Upgrades

Docker Community Edition 17.06.0-rc5-ce-mac16, 2017-06-21

Upgrades

Docker Community Edition 17.06.0-rc4-ce-mac15, 2017-06-16

Upgrades

Docker Community Edition 17.06.0-rc2-ce-mac14, 2017-06-08

Upgrades

Docker Community Edition 17.06.0-rc1-ce-mac13, 2017-06-01

Upgrades

New

  • GUI option to opt out of credential store
  • GUI option to reset docker data without losing all settings (fixes docker/for-mac#1309)
  • Add an experimental DNS name for the host: docker.for.mac.localhost
  • Support for client (such as "login") certificates for authenticating registry access (fixes docker/for-mac#1320)

Bug fixes and minor changes

  • Resync HTTP(S) proxy settings on application start
  • Interpret system proxy setting of localhost correctly (see docker/for-mac#1511)
  • All docker binaries bundled with Docker for Mac are now signed
  • Display all docker cloud organizations and repositories in the whale menu (fixes docker/for-mac#1538)
  • OSXFS: improved latency for many common operations, such as read and write by approximately 25%

Docker Community Edition 17.05.0-ce-mac11, 2017-05-12

Upgrades

  • Security fix for CVE-2017-7308

Docker Community Edition 17.05.0-ce-mac9, 2017-05-09

Upgrades

Bug fixes and minor changes

  • Fixed GUI crash when text table view was selected and windows re-opened (fixes docker/for-mac#1477)
  • Reset to default / uninstall also remove config.json and osxkeychain credentials
  • More detailed VirtualBox uninstall requirements ( docker/for-mac#1343)
  • You are now prompted for your password, if you changed it in Docker Cloud.
  • Request time sync after waking up to improve docker/for-mac#17

Docker Community Edition 17.05.0-ce-rc1-mac8, 2017-04-13

Upgrades

Docker Community Edition 17.04.0-ce-mac7, 2017-04-06

New

  • OSXFS: support for cached mount flag to improve performance of macOS mounts when strict consistency is not necessary

Upgrades

Bug fixes and minor changes

  • VPNKit: Improved DNS timeout handling (fixes docker/for-mac#202)
  • VPNKit: Use DNSServiceRef API by default (only enabled for new installs or after factory reset)
  • Add a reset to factory defaults button when application crashes
  • Toolbox import dialog now defaults to "Skip"

Docker Community Edition 17.04.0-ce-rc2-mac6, 2017-04-03

Upgrades

Bug fixes and minor changes

  • Buffered data should be treated correctly when Docker client requests are upgraded to raw streams
  • Removed an error message from the output related to experimental features handling
  • vmnetd should not crash when user home directory is on an external drive
  • Improved settings database schema handling
  • Disk trimming should work as expected
  • Diagnostics now contains more settings data

Docker Community Edition 17.03.1-ce-rc1-mac3, 2017-03-28

Upgrades

Bug fixes and minor changes

  • Use fsync rather than fcntl(F_FULLFSYNC)
  • Update max-connections to 2000 ( docker/for-mac#1374 and docker/for-mac#1132)
  • VPNKit: capture up to 64KiB of NTP traffic for diagnostics, better handling of DNS
  • UI: fix edge cases which crash the application
  • QCOW: numerous bugfixes
  • osxfs: buffer readdir

Docker Community Edition 17.03.0-ce-mac2, 2017-03-06

Hotfixes

  • Set the ethernet MTU to 1500 to prevent a hyperkit crash
  • Fix Docker build on private images

Upgrades

Docker Community Edition 17.03.0-ce-mac1, 2017-03-02

New

  • Renamed to Docker Community Edition
  • Integration with Docker Cloud: control remote Swarms from the local CLI and view your repositories. This feature is going to be rolled out to all users progressively
  • Docker will now securely store your IDs in the macOS keychain

Upgrades

Bug fixes and minor changes

  • VPNKit: fix unmarshalling of DNS packets containing pointers to pointers to labels
  • osxfs: catch EPERM when reading extended attributes of non-files
  • Add page_poison=1 to boot args
  • Add a new disk flushing option

Docker Community Edition 17.03.0 RC1 Release Notes (2017-02-22 17.03.0-ce-rc1-mac1)

New

  • Introduce Docker Community Edition
  • Integration with Docker Cloud to control remote Swarms from the local CLI and view your repositories. This feature will be rolled out to all users progressively
  • Docker will now use keychain access to secure your IDs

Upgrades

  • Docker 17.03.0-ce-rc1
  • Linux Kernel 4.9.11

Bug fixes and minor changes

  • VPNKit: fixed unmarshalling of DNS packets containing pointers to pointers to labels
  • osxfs: catch EPERM when reading extended attributes of non-files
  • Added page_poison=1 to boot args
  • Added a new disk flushing option

Beta 42 Release Notes (2017-02-09 1.13.1-beta42)

Upgrades

Beta 41 Release Notes (2017-02-07-2017-1.13.1-rc2-beta41)

Upgrades

Bug fixes and minor improvements

  • VPNKit: set the Recursion Available bit on DNS responses from the cache
  • Don’t use port 4222 inside the Linux VM

Beta 40 Release Notes (2017-01-31 1.13.1-rc1-beta40)

Upgrades

New

  • Allow to reset faulty daemon.json through a link in advanced subpanel
  • Add link to experimental features
  • Hide restart button in settings window
  • Increase the maximum number of vCPUs to 64

Bug fixes and minor improvements

  • VPNKit: Avoid diagnostics to capture too much data
  • VPNKit: Fix a source of occasional packet loss (truncation) on the virtual ethernet link
  • HyperKit: Dump guest physical and linear address from VMCS when dumping state
  • HyperKit: Kernel boots with panic=1 arg

Beta 39 Release Notes (2017-01-26 1.13.0-beta39)

Upgrades

  • Linux kernel 4.9.5

New

  • More options when moving disk image
  • Filesharing and daemon table empty fields are editable
  • DNS forwarder ignores responses from malfunctioning servers ( docker/for-mac#1025)
  • DNS forwarder send all queries in parallel, process results in order
  • DNS forwarder includes servers with zones in general searches ( docker/for-mac#997)
  • Parses aliases from /etc/hosts ( docker/for-mac#983)
  • Can resolve DNS requests through servers listed in the /etc/resolver directory on the host

Bug fixes and minor improvements

Beta 38 Release Notes (2017-01-20 1.13.0-beta38)

Upgrades

New

  • The storage location of the Linux volume can now be moved
  • Reclaim disk size on reboot
  • You can now edit filesharing paths
  • Memory can be allocated with 256 MiB steps
  • Proxy can now be completely disabled
  • Support for arm, aarch64, ppc64le architectures using qemu
  • Dedicated preference pane for advanced configuration of the docker daemon (edit daemon.json)
  • Docker Experimental mode can be toggled
  • Better support for Split DNS VPN configurations
  • Use more DNS servers, respect order

Bug fixes and minor improvements

  • You can't edit settings while docker is restarting
  • Support Copy/Paste in About box
  • Auto update polling every 24h
  • Kernel boots with vsyscall=emulate arg and CONFIG_LEGACY_VSYSCALL is set to NONE in Moby
  • Fixed vsock deadlock under heavy write load
  • If you opt-out of analytics, you're prompted for approval before a bug report is sent
  • Fixed bug where search domain could be read as DomainName
  • Dedicated preference pane for HTTP proxy settings.
  • Dedicated preference pane for CPU & Memory computing resources.
  • Privacy settings moved to the general preference pane
  • Fixed an issue where the preference pane disappeared when the welcome whale menu was closed.
  • HyperKit: code cleanup and minor fixes
  • Improvements to Logging and Diagnostics
  • osxfs: switch to libev/kqueue to improve latency
  • VPNKit: improvements to DNS handling
  • VPNKit: Improved diagnostics
  • VPNKit: Forwarded UDP datagrams should have correct source port numbers
  • VPNKit: add a local cache of DNS responses
  • VPNKit: If one request fails, allow other concurrent requests to succeed. For example this allows IPv4 servers to work even if IPv6 is broken.
  • VPNKit: Fix bug which could cause the connection tracking to underestimate the number of active connections

Beta 37 Release Notes (2017-01-16 1.13.0-rc7-beta37)

Upgrades

  • Docker 1.13.0-rc7
  • Notary 0.4.3
  • Linux kernel 4.9.3

Beta 36 Release Notes (2017-01-12 1.13.0-rc6-beta36)

Important Note: Plugins installed using the experimental "managed plugins" feature in Docker 1.12 must be removed/uninstalled before upgrading.

Upgrades

  • Docker 1.13.0-rc6
  • Docker Compose 1.10-rc2
  • Linux Kernel 4.9.2

Bug fixes and minor improvements

  • Uninstall should be more reliable

Beta 35 Release Notes (2017-01-06 1.13.0-rc5-beta35)

Important Note: Plugins installed using the experimental "managed plugins" feature in Docker 1.12 must be removed/uninstalled before upgrading.

Upgrades

  • Docker 1.13.0-rc5
  • Docker Compose 1.10-rc1

Edge Releases of 2016

Beta 34.1 Release Notes (2016-12-22 1.13.0-rc4-beta34.1)

Important Note: Plugins installed using the experimental "managed plugins" feature in Docker 1.12 must be removed/uninstalled before upgrading.

Hotfix

  • Fixed issue where Docker would fail to start after importing containers from Toolbox

Upgrades

  • qcow-tool 0.7.2

Beta 34 Release Notes (2016-12-20 1.13.0-rc4-beta34)

Important Note: Plugins installed using the experimental "managed plugins" feature in Docker 1.12 must be removed/uninstalled before upgrading.

New

  • Change UI for path location and open finder
  • Trim compact on reboot
  • Use more DNS servers, respect order

Upgrades

  • Docker 1.13.0-rc4
  • Linux Kernel 4.8.15

Bug fixes and minor improvements

  • New Daemon icon
  • Support Copy/Paste in About box
  • Fix advanced daemon check json changes
  • Auto update polling every 24h

Beta 33.1 Release Notes (2016-12-16 1.13.0-rc3-beta33.1)

Important Note: Plugins installed using the experimental "managed plugins" feature in Docker 1.12 must be removed/uninstalled before upgrading.

Hotfix

  • Fixed issue where sometimes TRIM would cause the virtual machine to hang

Beta 33 Release Notes (2016-12-15 1.13.0-rc3-beta33)

Important Note: Plugins installed using the experimental "managed plugins" feature in Docker 1.12 must be removed/uninstalled before upgrading.

New

  • You can now edit filesharing paths
  • YOu can allocate memory with 256 MiB steps
  • You can move the storage location of the Linux volume
  • More explicit proxy settings
  • You can completely disable Proxy
  • You can switch daemon tabs without losing your settings
  • You can't edit settings while Docker is restarting

Upgrades

  • Linux Kernel 4.8.14

Bug fixes and minor improvements

  • Kernel boots with vsyscall=emulate arg and CONFIG_LEGACY_VSYSCALL set to NONE in Moby

Beta 32 Release Notes (2016-12-07 1.13.0-rc3-beta32)

New

  • Support for arm, aarch64, ppc64le architectures using qemu

Upgrades

  • Docker 1.13.0-rc3
  • Docker Machine 0.9.0-rc2
  • Linux kernel 4.8.12

Bug fixes and minor improvements

  • VPNKit: Improved diagnostics
  • Fix vsock deadlock under heavy write load
  • On the beta channel you can't opt-out of analytics
  • If you opt-out of analytics, you're prompted for approval before a bug report is sent

Beta 31 Release Notes (2016-12-01 1.13.0-rc2-beta31)

New

Upgrades

  • Docker 1.13.0-rc2
  • Docker Compose 1.9.0
  • Docker Machine 0.9.0-rc1
  • Linux kernel 4.8.10

Bug fixes and minor improvements

  • Fixed bug where search domain could be read as DomainName
  • VPNKit: don't permute resource records in responses
  • VPNKit: reduced the amount of log spam
  • Dedicated preference pane for HTTP proxy settings
  • Dedicated preference pane for CPU & Memory computing resources
  • Privacy settings moved to the general preference pane
  • Fixed an issue where proxy settings were erased if registries or mirrors changed.
  • Tab key is now cycling through tabs while setting proxy parameters
  • Fixed an issue where the preference pane disappeared when the welcome whale menu was closed

Beta 30 Release Notes (2016-11-10 1.12.3-beta30)

New

  • Better support for Split DNS VPN configurations

Upgrades

  • Docker Compose 1.9.0-rc4
  • Linux kernel 4.4.30

Bug fixes and minor changes

  • HyperKit: code cleanup and minor fixes
  • VPNKit: improvements to DNS handling
  • Improvements to Logging and Diagnostics
  • osxfs: switched to libev/kqueue to improve latency

Beta 29.3 Release Notes (2016-11-02 1.12.3-beta29.3)

Upgrades

  • Docker Compose 1.9.0-rc2
  • osxfs: Fixed a simultaneous volume mount race which can result in a crash

Beta 29.2 Release Notes (2016-10-27 1.12.2-beta29.2)

Hotfixes

  • Upgrade to Docker 1.12.3

Beta 29.1 Release Notes (2016-10-26 1.12.1-beta29.1)

Hotfixes

  • Fixed missing /dev/pty/ptmx

Beta 29 Release Notes (2016-10-25 1.12.3-rc1-beta29)

New

  • Overlay2 is now the default storage driver. You must do a factory reset for overlay2 to be automatically used. (#5545)

Upgrades

  • Docker 1.12.3-rc1
  • Linux kernel 4.4.27

Bug fixes and minor changes

  • Fixed an issue where the whale animation during setting change was inconsistent
  • Fixed an issue where some windows stayed hidden behind another app
  • Fixed application of system or custom proxy settings over container restart
  • Increased default ulimit for memlock (fixes docker/for-mac#801 )
  • Fixed an issue where the Docker status would continue to be yellow/animated after the VM had started correctly
  • osxfs: fixed the prohibition of chown on read-only or mode 0 files (fixes docker/for-mac#117, docker/for-mac#263, docker/for-mac#633 )

Beta 28 Release Notes (2016-10-13 1.12.2-rc3-beta28)

Upgrades

  • Docker 1.12.2
  • Kernel 4.4.24
  • Notary 0.4.2

Bug fixes and minor changes

  • Fixed an issue where Docker for Mac was incorrectly reported as updated
  • osxfs: Fixed race condition causing some reads to run forever
  • Channel is now displayed in About box
  • Crash reports are sent over Bugsnag rather than HockeyApp

Beta 27 Release Notes (2016-09-28 1.12.2-rc1-beta27)

Upgrades

  • Docker 1.12.2-rc1
  • Docker Machine 0.8.2
  • Docker compose 1.8.1
  • Kernel vsock driver v7
  • Kernel 4.4.21
  • AUFS 20160912

Bug fixes and minor changes

  • Fixed an issue where some windows did not claim focus correctly
  • Added UI when switching channel to prevent user losing containers and settings
  • Check disk capacity before Toolbox import
  • Import certificates in etc/ssl/certs/ca-certificates.crt
  • DNS: reduce the number of UDP sockets consumed on the host
  • VPNkit: improve the connection-limiting code to avoid running out of sockets on the host
  • UDP: handle diagrams bigger than 2035, up to the configured macOS kernel limit
  • UDP: made the forwarding more robust; now, drop packets and continue rather than stopping
  • disk: made the "flush" behaviour configurable for database-like workloads. This works around a performance regression in v1.12.1.

Beta 26 Release Notes (2016-09-14 1.12.1-beta26)

New

  • Improved support for macOS 10.12 Sierra

Upgrades

  • Linux kernel 4.4.20
  • AUFS 20160905

Bug fixes and minor changes

  • Fixed communications glitch when UI talks to com.docker.vmnetd. Fixes docker/for-mac#90

  • UI fix for macOs 10.12

  • Windows open on top of full screen app are available in all spaces

  • Reporting a bug, while not previously logged into GitHub now works

  • When a diagnostic upload fails, the error is properly reported

  • docker-diagnose displays and records the time the diagnosis was captured

  • Ports are allowed to bind to host addresses other than 0.0.0.0 and 127.0.0.1. Fixes issue reported in docker/for-mac#68.

  • We no longer compute the container folder in com.docker.vmnetd. Fixes docker/for-mac#47.

Known Issues

  • Docker.app sometimes uses 200% CPU after macOS wakes up from sleep mode. The issue is being investigated. The workaround is to restart Docker.app.

  • There are a number of issues with the performance of directories bind-mounted with osxfs. In particular, writes of small blocks and traversals of large directories are currently slow. Additionally, containers that perform large numbers of directory operations, such as repeated scans of large directory trees, may suffer from poor performance. More information is available in Known Issues in Troubleshooting.

  • Under some unhandled error conditions, inotify event delivery can fail and become permanently disabled. The workaround is to restart Docker.app.

Beta 25 Release Notes (2016-09-07 1.12.1-beta25)

Upgrades

  • Experimental support for macOS 10.12 Sierra (beta)

Bug fixes and minor changes

  • VPNKit supports search domains
  • Entries from /etc/hosts should now resolve from within containers
  • osxfs: fix thread leak

Known issues

  • Several problems have been reported on macOS 10.12 Sierra and are being investigated. This includes failure to launch the app and being unable to upgrade to a new version.

  • Docker.app sometimes uses 200% CPU after macOS wakes up from sleep mode. The issue is being investigated. The workaround is to restart Docker.app

  • There are a number of issues with the performance of directories bind-mounted with osxfs. In particular, writes of small blocks and traversals of large directories are currently slow. Additionally, containers that perform large numbers of directory operations, such as repeated scans of large directory trees, may suffer from poor performance. More information is available in Known Issues in Troubleshooting.

  • Under some unhandled error conditions, inotify event delivery can fail and become permanently disabled. The workaround is to restart Docker.app.

Beta 24 Release Notes (2016-08-23 1.12.1-beta24)

Upgrades

  • Docker 1.12.1
  • Docker Machine 0.8.1
  • Linux kernel 4.4.19
  • AUFS 20160822

Bug fixes and minor changes

  • osxfs: fixed a malfunction of new directories that have the same name as an old directory that is still open

  • osxfs: rename events now trigger DELETE and/or MODIFY inotify events (saving with TextEdit works now)

  • slirp: support up to 8 external DNS servers

  • slirp: reduce the number of sockets used by UDP NAT, reduce the probability that NAT rules will time out earlier than expected

  • The app warns user if BlueStacks is installed (potential kernel panic)

Known issues

  • Several problems have been reported on macOS 10.12 Sierra and are being investigated. This includes failure to launch the app and being unable to upgrade to a new version.

  • Docker.app sometimes uses 200% CPU after macOS wakes up from sleep mode. The issue is being investigated. The workaround is to restart Docker.app.

  • There are a number of issues with the performance of directories bind-mounted with osxfs. In particular, writes of small blocks and traversals of large directories are currently slow. Additionally, containers that perform large numbers of directory operations, such as repeated scans of large directory trees, may suffer from poor performance. For more information and workarounds, see the bullet on performance of bind-mounted directories in Known Issues in Troubleshooting.

  • Under some unhandled error conditions, inotify event delivery can fail and become permanently disabled. The workaround is to restart Docker.app.

Beta 23 Release Notes (2016-08-16 1.12.1-rc1-beta23)

Upgrades

  • Docker 1.12.1-rc1
  • Linux kernel 4.4.17
  • AUFS 20160808

Bug fixes and minor changes

  • Moby: use default sysfs settings, transparent huge pages disabled
  • Moby: cgroup mount to support systemd in containers
  • osxfs: fixed an issue that caused inotify failure and crashes
  • osxfs: fixed a directory fd leak
  • Zsh completions

Known issues

  • Docker for Mac is not supported on macOS 10.12 Sierra

  • Docker.app sometimes uses 200% CPU after macOS wakes up from sleep mode. The issue is being investigated. The workaround is to restart Docker.app

  • There are a number of issues with the performance of directories bind-mounted with osxfs. In particular, writes of small blocks and traversals of large directories are currently slow. Additionally, containers that perform large numbers of directory operations, such as repeated scans of large directory trees, may suffer from poor performance. For more information and workarounds, see the bullet on performance of bind-mounted directories in Known Issues in Troubleshooting.

  • Under some unhandled error conditions, inotify event delivery can fail and become permanently disabled. The workaround is to restart Docker.app

Beta 22 Release Notes (2016-08-11 1.12.0-beta22)

Upgrades

  • Linux kernel to 4.4.16

Bug fixes and minor changes

  • Increase Moby fs.file-max to 524288
  • Use Mac System Configuration database to detect DNS
  • HyperKit updated with dtrace support and lock fixes
  • Fix Moby Diagnostics and Update Kernel
  • UI Fixes
  • osxfs: fix socket chowns

Known issues

  • Docker.app sometimes uses 200% CPU after macOS wakes up from sleep mode. The issue is being investigated. The workaround is to restart Docker.app

  • There are a number of issues with the performance of directories bind-mounted with osxfs. In particular, writes of small blocks and traversals of large directories are currently slow. Additionally, containers that perform large numbers of directory operations, such as repeated scans of large directory trees, may suffer from poor performance. More information is available in Known Issues.

  • Under some unhandled error conditions, inotify event delivery can fail and become permanently disabled. The workaround is to restart Docker.app

Beta 21.1 Release Notes (2016-08-03 1.12.0-beta21.1)

This bug fix release contains osxfs improvements. The fixed issues may have been seen as failures with apt-get and npm in containers, missed inotify events or unexpected unmounts.

Hotfixes

  • osxfs: fixed an issue causing access to children of renamed directories to fail (symptoms: npm failures, apt-get failures)

  • osxfs: fixed an issue causing some ATTRIB and CREATE inotify events to fail delivery and other inotify events to stop

  • osxfs: fixed an issue causing all inotify events to stop when an ancestor directory of a mounted directory was mounted

  • osxfs: fixed an issue causing volumes mounted under other mounts to spontaneously unmount (docker/docker#24503)

Docker for Mac 1.12.0 (2016-07-28 1.12.0-beta21)

New

  • Docker for Mac is now available from 2 channels: stable and beta. New features and bug fixes will go out first in auto-updates to users in the beta channel. Updates to the stable channel are much less frequent and happen in sync with major and minor releases of the Docker engine. Only features that are well-tested and ready for production are added to the stable channel releases. For downloads of both and more information, see the installation guide.

Upgrades

  • Docker 1.12.0 with experimental features
  • Docker Machine 0.8.0
  • Docker Compose 1.8.0

Bug fixes and minor changes

  • Check for updates, auto-update and diagnose can be run by non-admin users
  • osxfs: fixed an issue causing occasional incorrect short reads
  • osxfs: fixed an issue causing occasional EIO errors
  • osxfs: fixed an issue causing inotify creation events to fail
  • osxfs: increased the fs.inotify.max_user_watches limit in Moby to 524288
  • The UI shows documentation link for sharing volumes
  • Clearer error message when running with outdated VirtualBox version
  • Added link to sources for qemu-img

Known issues

  • Docker.app sometimes uses 200% CPU after macOS wakes up from sleep mode. The issue is being investigated. The workaround is to restart Docker.app

  • There are a number of issues with the performance of directories bind-mounted with osxfs. In particular, writes of small blocks, and traversals of large directories are currently slow. Additionally, containers that perform large numbers of directory operations, such as repeated scans of large directory trees, may suffer from poor performance. For more information and workarounds, see Known Issues in Logs and Troubleshooting.

  • Under some unhandled error conditions, inotify event delivery can fail and become permanently disabled. The workaround is to restart Docker.app

Beta 20 Release Notes (2016-07-19 1.12.0-rc4-beta20)

Bug fixes and minor changes

  • Fixed docker.sock permission issues
  • Don't check for update when the settings panel opens
  • Removed obsolete DNS workaround
  • Use the secondary DNS server in more circumstances
  • Limit the number of concurrent port forwards to avoid running out of resources
  • Store the database as a "bare" git repo to avoid corruption problems

Known issues

  • Docker.app sometimes uses 200% CPU after macOS wakes up from sleep mode. The issue is being investigated. The workaround is to restart Docker for Mac (Docker.app).

Beta 19 Release Notes (2016-07-14 1.12.0-rc4-beta19)

New

  • Added privacy tab in settings
  • Allow the definition of HTTP proxy overrides in the UI

Upgrades

  • Docker 1.12.0 RC4
  • Docker Compose 1.8.0 RC2
  • Docker Machine 0.8.0 RC2
  • Linux kernel 4.4.15

Bug fixes and minor changes

  • Filesystem sharing permissions can only be configured in the UI (no more /Mac in moby)
  • com.docker.osx.xhyve.hyperkit: increased max number of fds to 10240
  • Improved Moby syslog facilities
  • Improved file-sharing tab
  • com.docker.slirp: included the DNS TCP fallback fix, required when UDP responses are truncated
  • docker build/events/logs/stats... won't leak when iterrupted with Ctrl-C

Known issues

Beta 18.1 Release Notes (2016-07-07 1.12.0-rc3-beta18.1)

Note: Docker 1.12.0 RC3 release introduces a backward incompatible change from RC2. You can fix this by recreating or updating your containers.

Hotfix

  • Fixed issue resulting in error "Hijack is incompatible with use of CloseNotifier", reverts previous fix for Ctrl-C during build.

New

  • New host/container file sharing UI
  • /Mac bind mount prefix is deprecated and will be removed soon

Upgrades

  • Docker 1.12.0 RC3

Bug fixes and minor changes

  • VPNKit: Improved scalability as number of network connections increases
  • The docker API proxy was failing to deal with some 1.12 features, such as health check.

Known issues

Beta 18 Release Notes (2016-07-06 1.12.0-rc3-beta18)

New

  • New host/container file sharing UI
  • /Mac bind mount prefix is deprecated and will be removed soon

Upgrades

  • Docker 1.12.0 RC3

Bug fixes and minor changes

  • VPNKit: Improved scalability as number of network connections increases
  • Interrupting a docker build with Ctrl-C will actually stop the build
  • The docker API proxy was failing to deal with some 1.12 features, such as health check.

Known issues

Beta 17 Release Notes (2016-06-29 1.12.0-rc2-beta17)

Upgrades

  • Linux kernel 4.4.14, AUFS 20160627

Bug fixes and minor changes

  • Documentation moved to /desktop/mac/
  • Allow non-admin users to launch the app for the first time (using admin creds)
  • Prompt non-admin users for admin password when needed in Preferences
  • Fixed download links, documentation links
  • Fixed "failure: No error" message in diagnostic panel
  • Improved diagnostics for networking and logs for the service port openers

Known issues

Beta 16 Release Notes (2016-06-17 1.12.0-rc2-beta16)

Upgrades

  • Docker 1.12.0 RC2
  • docker-compose 1.8.0 RC1
  • docker-machine 0.8.0 RC1
  • notary 0.3
  • Alpine 3.4

Bug fixes and minor changes

  • VPNKit: Fixed a regressed error message when a port is in use
  • Fixed UI crashing with NSInternalInconsistencyException / fixed leak
  • HyperKit API: Improved error reporting
  • osxfs: fix sporadic EBADF due to fd access/release races (#3683)

Known issues

Beta 15 Release Notes (2016-06-10 1.11.2-beta15)

New

  • Registry mirror and insecure registries can now be configured from Preferences
  • Virtual machine can now be restarted from Preferences
  • sysctl.conf can be edited from Preferences

Upgrades

  • Docker 1.11.2
  • Linux 4.4.12, aufs 20160530

Bug fixes and minor changes

  • Timekeeping in Moby VM improved
  • Number of concurrent TCP/UDP connections increased in VPNKit
  • Hyperkit: vsock stability improvements
  • Fixed crash when user is admin

Known issues

Beta 14 Release Notes (2016-06-02 1.11.1-beta14)

New

  • New settings menu item, Diagnose & Feedback, is available to run diagnostics and upload logs to Docker.

Known issues

  • Docker.app sometimes uses 200% CPU after macOS wakes up from sleep mode with macOS 10.10. The issue is being investigated. The workaround is to restart Docker.app.

Bug fixes and minor changes

  • osxfs: now support statfs
  • Preferences: updated toolbar icons
  • Fall back to secondary DNS server if primary fails.
  • Added a link to the documentation from menu.

Beta 13.1 Release Notes (2016-05-28 1.11.1-beta13.1)

Hotfixes

  • osxfs:
    • Fixed sporadic EBADF errors and End_of_file crashes due to a race corrupting node table invariants
    • Fixed a crash after accessing a sibling of a file moved to another directory caused by a node table invariant violation
  • Fixed issue where Proxy settings were applied on network change, causing docker daemon to restart too often
  • Fixed issue where log file sizes doubled on docker daemon restart

Beta 13 Release Notes (2016-05-25 1.11.1-beta13)

New

  • osxfs: Enabled 10ms dcache for 3x speedup on a go list ./... test against docker/machine. Workloads heavy in file system path resolution (common among dynamic languages and build systems) will have those resolutions performed in amortized constant time rather than time linear in the depth of the path so speedups of 2-10x will be common.

  • Support multiple users on the same machine, non-admin users can use the app as long as vmnetd has been installed. Currently, only one user can be logged in at the same time.

  • Basic support for using system HTTP/HTTPS proxy in docker daemon

Known issues

  • Docker.app sometimes uses 200% CPU after macOS wakes up from sleep mode. The issue is being investigated. The workaround is to restart Docker.app.

Bug fixes and minor changes

  • osxfs:
    • setting atime and mtime of nodes is now supported
    • Fixed major regression in Beta 12 with ENOENT, ENOTEMPY, and other spurious errors after a directory rename. This manifested as npm install failure and other directory traversal issues.
    • Fixed temporary file ENOENT errors
    • Fixed in-place editing file truncation error, such as when running perl -i
  • improved time synchronisation after sleep

Beta 12 Release (2016-05-17 1.11.1-beta12)

Upgrades

  • FUSE 7.23 for osxfs

Known issues

  • Docker.app sometimes uses 200% CPU after macOS wakes up from sleep mode. The issue is being investigated. The workaround is to restart Docker.app.

Bug fixes and minor changes

  • UI improvements
  • Fixed a problem in osxfs wheremkdir returned EBUSY but directory was created.

Beta 11 Release (2016-05-10 1.11.1-beta11)

New

The osxfs file system now persists ownership changes in an extended attribute.

Upgrades

  • docker-compose 1.7.1 (see changelog)
  • Linux kernel 4.4.9

Bug fixes and minor changes

  • Desktop notifications after successful update
  • No "update available" popup during install process
  • Fixed repeated bind of privileged ports
  • osxfs: Fixed the block count reported by stat
  • Moby (Backend) fixes:
    • Fixed vsock half closed issue
    • Added NFS support
    • Hostname is now Moby, not Docker
    • Fixes to disk formatting scripts
    • Linux kernel upgrade to 4.4.9

Beta 10 Release (2016-05-03 1.11.0-beta10)

New

  • Token validation is now done over an actual SSL tunnel (HTTPS). (This should fix issues with antivirus applications.)

Upgrades

  • Docker 1.11.1

Bug fixes and minor changes

  • UCP now starts again
  • Include debugging symbols in HyperKit
  • vsock stability improvements
  • Addressed glitches in Preferences panel
  • Fixed issues impacting the “whale menu”
  • Fixed uninstall process
  • HyperKit vcpu state machine improvements, may improve suspend/resume

Beta 9 Release (2016-04-26 1.11.0-beta9)

New

  • New Preferences window - memory and vCPUs now adjustable
  • localhost is now used for port forwarding by default.docker.local will no longer work as of Beta 9.

Known issues

  • Docker.app sometimes uses 200% CPU after macOS wakes up from sleep mode. The issue is being investigated. The workaround is to restart Docker.app.

Bug fixes and minor changes

  • Fix loopback device naming
  • Improved docker socket download and osxfs sequential write by 20%
  • com.docker.osxfs
    • improved sequential read throughput by up to 20%
    • improved readdir performance by up to 6x
    • log all fatal exceptions
  • More reliable DNS forwarding over UDP and TCP
  • UDP ports can be proxied over vsock
  • Fixed EADDRINUSE (manifesting as errno 526) when ports are re-used
  • Send ICMP when asked to not fragment and we can't guarantee it
  • Fixed parsing of UDP datagrams with IP socket options
  • Drop abnormally large ethernet frames
  • Improved HyperKit logging
  • Record virtual machine start and stop events

Beta 8 Release (2016-04-20 1.11.0-beta8)

New

  • Networking mode switched to VPN compatible by default, and as part of this change the overall experience has been improved:
  • docker.local now works in VPN compatibility mode
  • exposing ports on the Mac is available in both networking modes
  • port forwarding of privileged ports now works in both networking modes
  • traffic to external DNS servers is no longer dropped in VPN mode
  • osxfs now uses AF_VSOCK for transport giving ~1.8x speedup for large sequential read/write workloads but increasing latency by ~1.3x. osxfs performance engineering work continues.

Known issues

  • Docker.app sometimes uses 200% CPU after macOS wakes up from sleep mode. The issue is being investigated. The workaround is to restart Docker.app

Bug fixes and minor changes

  • Apple System Log now used for most logs instead of direct filesystem logging
  • docker_proxy fixes
  • Merged HyperKit upstream patches
  • Improved error reporting in nat network mode
  • osxfs transfused client now logs over AF_VSOCK
  • Fixed a com.docker.osx.HyperKit.linux supervisor deadlock if processes exit during a controlled shutdown
  • Fixed VPN mode malformed DNS query bug preventing some resolutions

Beta 7 Release (2016-04-12 1.11.0-beta7)

New

  • Docs are updated per the Beta 7 release
  • Use AF_VSOCK for docker socket transport

Upgrades

  • docker 1.11.0-rc5
  • docker-machine 0.7.0-rc3
  • docker-compose 1.7.0rc2

Known issues

  • Docker.app sometimes uses 200% CPU after macOS wakes up from sleep mode. The issue is being investigated. The workaround is to restart Docker.app

  • If VPN mode is enabled and then disabled and then re-enabled again, docker ps will block for 90s

Bug fixes and minor changes

  • Logging improvements
  • Improve process management

Beta 6 Release (2016-04-05 1.11.0-beta6)

New

  • Docs are updated per the Beta 6 release
  • Added uninstall option in user interface

Upgrades

  • docker 1.11.0-rc5
  • docker-machine 0.7.0-rc3
  • docker-compose 1.7.0rc2

Known issues

  • Docker.app sometimes uses 200% CPU after macOS wakes up from sleep mode. The issue is being investigated. The workaround is to restart Docker.app.

  • If VPN mode is enabled, then disabled and re-enabled again, docker ps will block for 90 seconds.

Bug fixes and minor changes

  • Fixed osxfs multiple same directory bind mounts stopping inotify
  • Fixed osxfs setattr on mode 0 files (sed failures)
  • Fixed osxfs blocking all operations during readdir
  • Fixed osxfs mishandled errors which crashed the file system and VM
  • Removed outdated lofs/9p support
  • Added more debugging info to logs uploaded by pinata diagnose
  • Improved diagnostics from within the virtual machine
  • VirtualBox version check now also works without VBoxManage in path
  • VPN mode now uses same IP range as NAT mode
  • Tokens are now verified on port 443
  • Removed outdated uninstall scripts
  • Increased default ulimits
  • Port forwarding with -p and -P should work in VPN mode
  • Fixed a memory leak in com.docker.db
  • Fixed a race condition on startup between Docker and networking which can lead to Docker.app not starting on reboot

Beta 5 Release (2016-03-29 1.10.3-beta5)

New

  • Docs are updated per the Beta 5 release!

Known issues

  • There is a race on startup between docker and networking which can lead to Docker.app not starting on reboot. The workaround is to restart the application manually.

  • Docker.app sometimes uses 200% CPU after macOS wakes up from sleep mode. The issue is being investigated. The workaround is to restart Docker.app.

  • In VPN mode, the -p option needs to be explicitly of the form -p <host port>:<container port>. -p <port> and -P will not work yet.

Bug fixes and minor changes

  • Updated DMG background image
  • Show correct VM memory in Preferences
  • Feedback opens forum, not email
  • Fixed RAM amount error message
  • Fixed wording of CPU error dialog
  • Removed status from Preferences
  • Check for incompatible versions of VirtualBox

Beta 4 Release (2016-03-22 1.10.3-beta4)

New Features and Upgrades

  • File system/sharing: Support inotify events so that file system events on the Mac will trigger file system activations inside Linux containers

  • Install Docker Machine as a part of Docker for Mac install in /usr/local

  • Added animated popover window to help first-time users get started

  • Added a Beta icon to About box

Known Issues

  • There is a race on startup between Docker and networking that can lead to Docker.app not starting on reboot. The workaround is to restart the application manually.

  • Docker.app sometimes uses 200% CPU after macOS wakes up from sleep mode. The issue is being investigated. The workaround is to restart Docker.app.

  • VPN/Hostnet: In VPN mode, the -p option needs to be explicitly of the form -p <host port>:<container port>. -p <port> and -P will not work yet.

Bug fixes and minor changes

  • Hostnet/VPN mode: Fixed Moby DNS resolver failures by proxying the "Recursion Available" flag.

  • docker ps shows IP address rather than docker.local

  • Re-enabled support for macOS Yosemite version 10.10

  • Ensured binaries are built for 10.10 rather than 10.11

  • Fixed “Notification Center”-related crash on startup

  • Fixed watchdog crash on startup

Beta 3 Release (2016-03-15 1.10.3-beta3)

New Features and Upgrades

  • Improved file sharing write speed in osxfs

  • User space networking: Renamed bridged mode to nat mode

  • Docker runs in debug mode by default for new installs

  • Docker Engine: Upgraded to 1.10.3

Bug fixes and minor changes

  • GUI: Auto update automatically checks for new versions again

  • File System

    • Fixed osxfs chmod on sockets
    • FixED osxfs EINVAL from open using O_NOFOLLOW

  • Hypervisor stability fixes, resynced with upstream repository

  • Hostnet/VPN mode

    • Fixed get/set VPN mode in Preferences (GUI)
    • Added more verbose logging on errors in nat mode
    • Show correct forwarding details in docker ps/inspect/port in nat mode

  • New lines ignored in token entry field

  • Feedback mail has app version in subject field

  • Clarified open source licenses

  • Crash reporting and error handling

    • Fixed HockeyApp crash reporting
    • Fatal GUI errors now correctly terminate the app again
    • Fix proxy panics on EOF when decoding JSON
    • Fix long delay/crash when switching from hostnet to nat mode

  • Logging

    • Moby logs included in diagnose upload
    • App version included in logs on startup

Beta 2 Release (2016-03-08 1.10.2-beta2)

New Features and Upgrades

  • GUI

    • Added VPN mode/hostnet to Preferences
    • Added disable Time Machine backups of VM disk image to Preferences

  • Added pinata configuration tool for experimental Preferences

  • File System: Added guest-to-guest FIFO and socket file support

  • Upgraded Notary to version 0.2

Bug fixes and minor changes

  • Fixed data corruption bug during cp (use of sendfile/splice)

  • Fixed About box to contain correct version string

  • Hostnet/VPN mode

    • Stability fixes and tests
    • Fixed DNS issues when changing networks

  • Cleaned up Docker startup code related to Moby

  • Fixed various problems with linking and dependencies

  • Various improvements to logging

Beta 1 Release (2016-03-01 1.10.2-b1)

  • GUI

    • Added dialog to explain why we need admin rights
    • Removed shutdown/quit window
    • Improved machine migration
    • Added “Help” option in menu to open documentation web pages
    • Added license agreement
    • Added MixPanel support

  • Added HockeyApp crash reporting

  • Improve signal handling on task manager

  • Use ISO timestamps with microsecond precision for logging

  • Clean up logging format

  • Packaging

    • Create /usr/local if it doesn't exist
    • docker-uninstall improvements
    • Remove docker-select as it's no longer used

  • Hypervisor

    • Added PID file
    • Networking reliability improvements

  • Hostnet

    • Fixed port forwarding issue
    • Stability fixes
    • Fixed setting hostname

  • Fixed permissions on usr/local symbolic links