Build your own image

Estimated reading time: 9 minutes

The whalesay image could be improved. It would be nice if you didn’t have to think of something to say and you didn’t need to type as much to get whalesay to talk.

docker run docker/whalesay cowsay boo-boo

In this next section, you will improve the whalesay image by building a new version that “talks on its own” and requires fewer words to run.

Step 1: Write a Dockerfile

In this step, you use a text editor to write a short Dockerfile. A Dockerfile is a recipe which describes the files, environment, and commands that make up an image. Your recipe is going to be very short.

You run these steps in a terminal window on Linux or macOS, or a command prompt on Windows. Remember that if you are using macOS or Windows, you are still creating an image which runs on Linux.

  1. Make a new directory. If you’re on Windows, use md instead of mkdir.

    $ mkdir mydockerbuild
    

    This directory will contain all the things you need to build your image. Right now, it’s empty.

  2. Change to your new directory. Whether you’re on Linux, macOS, or Windows, the cd command is the same.

    $ cd mydockerbuild
    
  3. Edit a new text file named Dockerfile in the current directory, using a text editor such as nano or vi on Linux or Mac, or notepad on Windows.

    Linux or Mac:

    $ nano Dockerfile
    

    Windows:

    C:\> notepad Dockerfile.
    
  4. Add a FROM statement by copying the following line into the file:

    FROM docker/whalesay:latest
    

    The FROM keyword tells Docker which image your image is based on. Whalesay is cute and has the cowsay program already, so we’ll start there.

  5. Add a RUN statement which will install the fortunes program into the image.

    RUN apt-get -y update && apt-get install -y fortunes
    

    The whalesay image is based on Ubuntu, which uses apt-get to install packages. These two commands refresh the list of packages available to the image and install the fortunes program into it. The fortunes program prints out wise sayings for our whale to say.

  6. Add a CMD statement, which tells the image the final command to run after its environment is set up. This command runs fortune -a and sends its output to the cowsay command.

    CMD /usr/games/fortune -a | cowsay
    
  7. Check your work. Your file should look just like this:

    FROM docker/whalesay:latest
    RUN apt-get -y update && apt-get install -y fortunes
    CMD /usr/games/fortune -a | cowsay
    
  8. Save the file and close the text editor. At this point, your software recipe is described in the Dockerfile file. You are ready to build a new image.

Step 2: Build an image from your Dockerfile

While you are in the mydockerbuild directory, build the image using the docker build command. The -t parameter gives your image a tag, so you can run it more easily later. Don’t forget the . command, which tells the docker build command to look in the current directory for a file called Dockerfile. This command works the same in Linux, macOS, or Windows.

$ docker build -t docker-whale .

Sending build context to Docker daemon 2.048 kB
...snip...
Removing intermediate container cb53c9d09f3b
Successfully built c2c3152907b5

The command takes several seconds to run and reports its outcome. Keep reading to learn a little more about what the output means and what happens when you build an image.

Step 3: Learn about the build process

The docker build -t docker-whale . command reads the Dockerfile in the current directory and processes its instructions one by one to build an image called docker-whale on your local machine. The command takes about a minute and its output looks really long and complex. In this section, you learn what each message means.

  1. Docker checks to make sure it has everything it needs to build. This generates this message:

    Sending build context to Docker daemon 2.048 kB
    
  2. Docker checks to see whether it already has the whalesay image locally and pulls it from Docker hub if not. In this case, the image already exists locally because you pulled it in a previous task. This corresponds to FROM statement in the Dockerfile, and generates this message:

    Step 1 : FROM docker/whalesay:latest
     ---> 6b362a9f73eb
    

    At the end of each step, an ID is printed. This is the ID of the layer that was created by this step. Each line in a Dockerfile corresponds to a layer in the image. Your ID will be different.

  3. Docker starts up a temporary container running the whalesay image (the Running in line below). In the temporary container, Docker runs the next command in the Dockerfile, which is the RUN command, which installs the fortune command. This generates a lot of lines of output, just like you would see if you were manually running the apt-get commands on an Ubuntu host.

    Step 2 : RUN apt-get -y update && apt-get install -y fortunes
     ---> Running in 05d4eda04526
    Ign http://archive.ubuntu.com trusty InRelease
    Get:1 http://archive.ubuntu.com trusty-updates InRelease [65.9 kB]
    Get:2 http://archive.ubuntu.com trusty-security InRelease [65.9 kB]
    Hit http://archive.ubuntu.com trusty Release.gpg
    Hit http://archive.ubuntu.com trusty Release
    Get:3 http://archive.ubuntu.com trusty-updates/main Sources [480 kB]
    Get:4 http://archive.ubuntu.com trusty-updates/restricted Sources [5921 B]
    Get:5 http://archive.ubuntu.com trusty-updates/universe Sources [214 kB]
    Get:6 http://archive.ubuntu.com trusty-updates/main amd64 Packages [1160 kB]
    Get:7 http://archive.ubuntu.com trusty-updates/restricted amd64 Packages [20.4 kB]
    Get:8 http://archive.ubuntu.com trusty-updates/universe amd64 Packages [505 kB]
    Get:9 http://archive.ubuntu.com trusty-security/main Sources [157 kB]
    Get:10 http://archive.ubuntu.com trusty-security/restricted Sources [4621 B]
    Get:11 http://archive.ubuntu.com trusty-security/universe Sources [54.5 kB]
    Get:12 http://archive.ubuntu.com trusty-security/main amd64 Packages [700 kB]
    Get:13 http://archive.ubuntu.com trusty-security/restricted amd64 Packages [17.0 kB]
    Get:14 http://archive.ubuntu.com trusty-security/universe amd64 Packages [191 kB]
    Hit http://archive.ubuntu.com trusty/main Sources
    Hit http://archive.ubuntu.com trusty/restricted Sources
    Hit http://archive.ubuntu.com trusty/universe Sources
    Hit http://archive.ubuntu.com trusty/main amd64 Packages
    Hit http://archive.ubuntu.com trusty/restricted amd64 Packages
    Hit http://archive.ubuntu.com trusty/universe amd64 Packages
    Fetched 3640 kB in 11s (329 kB/s)
    Reading package lists...
    Reading package lists...
    Building dependency tree...
    Reading state information...
    The following extra packages will be installed:
      fortune-mod fortunes-min librecode0
    Suggested packages:
      x11-utils bsdmainutils
    The following NEW packages will be installed:
      fortune-mod fortunes fortunes-min librecode0
    0 upgraded, 4 newly installed, 0 to remove and 92 not upgraded.
    Need to get 1961 kB of archives.
    After this operation, 4817 kB of additional disk space will be used.
    Get:1 http://archive.ubuntu.com/ubuntu/ trusty/main librecode0 amd64 3.6-21 [771 kB]
    Get:2 http://archive.ubuntu.com/ubuntu/ trusty/universe fortune-mod amd64 1:1.99.1-7 [39.5 kB]
    Get:3 http://archive.ubuntu.com/ubuntu/ trusty/universe fortunes-min all 1:1.99.1-7 [61.8 kB]
    Get:4 http://archive.ubuntu.com/ubuntu/ trusty/universe fortunes all 1:1.99.1-7 [1089 kB]
    debconf: unable to initialize frontend: Dialog
    debconf: (TERM is not set, so the dialog frontend is not usable.)
    debconf: falling back to frontend: Readline
    debconf: unable to initialize frontend: Readline
    debconf: (This frontend requires a controlling tty.)
    debconf: falling back to frontend: Teletype
    dpkg-preconfigure: unable to re-open stdin:
    Fetched 1961 kB in 19s (101 kB/s)
    Selecting previously unselected package librecode0:amd64.
    (Reading database ... 13116 files and directories currently installed.)
    Preparing to unpack .../librecode0_3.6-21_amd64.deb ...
    Unpacking librecode0:amd64 (3.6-21) ...
    Selecting previously unselected package fortune-mod.
    Preparing to unpack .../fortune-mod_1%3a1.99.1-7_amd64.deb ...
    Unpacking fortune-mod (1:1.99.1-7) ...
    Selecting previously unselected package fortunes-min.
    Preparing to unpack .../fortunes-min_1%3a1.99.1-7_all.deb ...
    Unpacking fortunes-min (1:1.99.1-7) ...
    Selecting previously unselected package fortunes.
    Preparing to unpack .../fortunes_1%3a1.99.1-7_all.deb ...
    Unpacking fortunes (1:1.99.1-7) ...
    Setting up librecode0:amd64 (3.6-21) ...
    Setting up fortune-mod (1:1.99.1-7) ...
    Setting up fortunes-min (1:1.99.1-7) ...
    Setting up fortunes (1:1.99.1-7) ...
    Processing triggers for libc-bin (2.19-0ubuntu6.6) ...
     ---> dfaf993d4a2e
    Removing intermediate container 05d4eda04526
    

    When the RUN command finishes, a new layer is created and the intermediate container is removed.

  4. A new intermediate container is created, and Docker adds a layer for the CMD line in the Dockerfile, and removes the intermediate container.

    Step 3 : CMD /usr/games/fortune -a | cowsay
     ---> Running in a8e6faa88df3
     ---> 7d9495d03763
    Removing intermediate container a8e6faa88df3
    Successfully built 7d9495d03763
    

You have now built an image called docker-whale.

Step 4: Run your new docker-whale

Now you can verify that the new image is on your computer and you can run it.

  1. In a terminal window or command prompt, type docker images, which lists the images you have locally.

    $ docker images
    
    REPOSITORY           TAG          IMAGE ID          CREATED             SIZE
    docker-whale         latest       c2c3152907b5      4 minutes ago       275.1 MB
    docker/whalesay      latest       fb434121fc77      4 hours ago         247 MB
    hello-world          latest       91c95931e552      5 weeks ago         910 B
    
  2. Run your new image by typing docker run docker-whale.

    
    $ docker run docker-whale
    
     ______________________________________
    < You will be successful in your work. >
     --------------------------------------
        \
         \
          \
                        ##        .
                  ## ## ##       ==
               ## ## ## ##      ===
           /""""""""""""""""___/ ===
      ~~~ {~~ ~~~~ ~~~ ~~~~ ~~ ~ /  ===- ~~~
           \______ o          __/
            \    \        __/
              \____\______/
    

    The whale is now a lot smarter. It comes up with its own thoughts and it takes less typing to run. You may also notice that Docker didn’t have to download anything, because you built the image locally.

  3. Just for fun, run it again.

     _______________________________________
    / If everything seems to be going well, \
    | you have obviously overlooked         |
    \ something.                            /
     ---------------------------------------
        \
         \
          \
                        ##        .
                  ## ## ##       ==
               ## ## ## ##      ===
           /""""""""""""""""___/ ===
      ~~~ {~~ ~~~~ ~~~ ~~~~ ~~ ~ /  ===- ~~~
           \______ o          __/
            \    \        __/
              \____\______/
    
    

Your whale now has a mind of its own, but if you don’t like what it says, just run it again!

Where to go next

Now that you have learned to build an image and run it, you can learn to share the image by creating a Docker Hub account.

chat icon Feedback? Suggestions? Can't find something in the docs?
Edit this page Request docs changes Get support