docker container ls

DescriptionList containers
Usagedocker container ls [OPTIONS]
Aliases
docker container list docker container ps docker ps

Description

List containers

Options

OptionDefaultDescription
-a, --allShow all containers (default shows just running)
-f, --filterFilter output based on conditions provided
--formatFormat output using a custom template:
'table': Print output in table format with column headers (default)
'table TEMPLATE': Print output in table format using the given Go template
'json': Print in JSON format
'TEMPLATE': Print output using the given Go template.
Refer to https://docs.docker.com/go/formatting/ for more information about formatting output with templates
-n, --last-1Show n last created containers (includes all states)
-l, --latestShow the latest created container (includes all states)
--no-truncDon't truncate output
-q, --quietOnly display container IDs
-s, --sizeDisplay total file sizes

Examples

Do not truncate output (--no-trunc)

Running docker ps --no-trunc showing 2 linked containers.

$ docker ps --no-trunc

CONTAINER ID                                                     IMAGE                        COMMAND                CREATED              STATUS              PORTS               NAMES
ca5534a51dd04bbcebe9b23ba05f389466cf0c190f1f8f182d7eea92a9671d00 ubuntu:22.04                 bash                   17 seconds ago       Up 16 seconds       3300-3310/tcp       webapp
9ca9747b233100676a48cc7806131586213fa5dab86dd1972d6a8732e3a84a4d crosbymichael/redis:latest   /redis-server --dir    33 minutes ago       Up 33 minutes       6379/tcp            redis,webapp/db

Show both running and stopped containers (-a, --all)

The docker ps command only shows running containers by default. To see all containers, use the --all (or -a) flag:

$ docker ps -a

docker ps groups exposed ports into a single range if possible. E.g., a container that exposes TCP ports 100, 101, 102 displays 100-102/tcp in the PORTS column.

Show disk usage by container (--size)

The docker ps --size (or -s) command displays two different on-disk-sizes for each container:

$ docker ps --size

CONTAINER ID   IMAGE          COMMAND                  CREATED        STATUS       PORTS   NAMES        SIZE
e90b8831a4b8   nginx          "/bin/bash -c 'mkdir "   11 weeks ago   Up 4 hours           my_nginx     35.58 kB (virtual 109.2 MB)
00c6131c5e30   telegraf:1.5   "/entrypoint.sh"         11 weeks ago   Up 11 weeks          my_telegraf  0 B (virtual 209.5 MB)
  • The "size" information shows the amount of data (on disk) that is used for the writable layer of each container
  • The "virtual size" is the total amount of disk-space used for the read-only image data used by the container and the writable layer.

For more information, refer to the container size on disk section.

Filtering (--filter)

The --filter (or -f) flag format is a key=value pair. If there is more than one filter, then pass multiple flags (e.g. --filter "foo=bar" --filter "bif=baz").

The currently supported filters are:

FilterDescription
idContainer's ID
nameContainer's name
labelAn arbitrary string representing either a key or a key-value pair. Expressed as <key> or <key>=<value>
exitedAn integer representing the container's exit code. Only useful with --all.
statusOne of created, restarting, running, removing, paused, exited, or dead
ancestorFilters containers which share a given image as an ancestor. Expressed as <image-name>[:<tag>], <image id>, or <image@digest>
before or sinceFilters containers created before or after a given container ID or name
volumeFilters running containers which have mounted a given volume or bind mount.
networkFilters running containers connected to a given network.
publish or exposeFilters containers which publish or expose a given port. Expressed as <port>[/<proto>] or <startport-endport>/[<proto>]
healthFilters containers based on their healthcheck status. One of starting, healthy, unhealthy or none.
isolationWindows daemon only. One of default, process, or hyperv.
is-taskFilters containers that are a "task" for a service. Boolean option (true or false)

label

The label filter matches containers based on the presence of a label alone or a label and a value.

The following filter matches containers with the color label regardless of its value.

$ docker ps --filter "label=color"

CONTAINER ID        IMAGE               COMMAND             CREATED             STATUS              PORTS               NAMES
673394ef1d4c        busybox             "top"               47 seconds ago      Up 45 seconds                           nostalgic_shockley
d85756f57265        busybox             "top"               52 seconds ago      Up 51 seconds                           high_albattani

The following filter matches containers with the color label with the blue value.

$ docker ps --filter "label=color=blue"

CONTAINER ID        IMAGE               COMMAND             CREATED              STATUS              PORTS               NAMES
d85756f57265        busybox             "top"               About a minute ago   Up About a minute                       high_albattani

name

The name filter matches on all or part of a container's name.

The following filter matches all containers with a name containing the nostalgic_stallman string.

$ docker ps --filter "name=nostalgic_stallman"

CONTAINER ID        IMAGE               COMMAND             CREATED             STATUS              PORTS               NAMES
9b6247364a03        busybox             "top"               2 minutes ago       Up 2 minutes                            nostalgic_stallman

You can also filter for a substring in a name as this shows:

$ docker ps --filter "name=nostalgic"

CONTAINER ID        IMAGE               COMMAND             CREATED             STATUS              PORTS               NAMES
715ebfcee040        busybox             "top"               3 seconds ago       Up 1 second                             i_am_nostalgic
9b6247364a03        busybox             "top"               7 minutes ago       Up 7 minutes                            nostalgic_stallman
673394ef1d4c        busybox             "top"               38 minutes ago      Up 38 minutes                           nostalgic_shockley

exited

The exited filter matches containers by exist status code. For example, to filter for containers that have exited successfully:

$ docker ps -a --filter 'exited=0'

CONTAINER ID        IMAGE             COMMAND                CREATED             STATUS                   PORTS                      NAMES
ea09c3c82f6e        registry:latest   /srv/run.sh            2 weeks ago         Exited (0) 2 weeks ago   127.0.0.1:5000->5000/tcp   desperate_leakey
106ea823fe4e        fedora:latest     /bin/sh -c 'bash -l'   2 weeks ago         Exited (0) 2 weeks ago                              determined_albattani
48ee228c9464        fedora:20         bash                   2 weeks ago         Exited (0) 2 weeks ago                              tender_torvalds

Filter by exit signal

You can use a filter to locate containers that exited with status of 137 meaning a SIGKILL(9) killed them.

$ docker ps -a --filter 'exited=137'

CONTAINER ID        IMAGE               COMMAND                CREATED             STATUS                       PORTS               NAMES
b3e1c0ed5bfe        ubuntu:latest       "sleep 1000"           12 seconds ago      Exited (137) 5 seconds ago                       grave_kowalevski
a2eb5558d669        redis:latest        "/entrypoint.sh redi   2 hours ago         Exited (137) 2 hours ago                         sharp_lalande

Any of these events result in a 137 status:

  • the init process of the container is killed manually
  • docker kill kills the container
  • Docker daemon restarts which kills all running containers

status

The status filter matches containers by status. The possible values for the container status are:

StatusDescription
createdA container that has never been started.
runningA running container, started by either docker start or docker run.
pausedA paused container. See docker pause.
restartingA container which is starting due to the designated restart policy for that container.
exitedA container which is no longer running. For example, the process inside the container completed or the container was stopped using the docker stop command.
removingA container which is in the process of being removed. See docker rm.
deadA "defunct" container; for example, a container that was only partially removed because resources were kept busy by an external process. dead containers cannot be (re)started, only removed.

For example, to filter for running containers:

$ docker ps --filter status=running

CONTAINER ID        IMAGE                  COMMAND             CREATED             STATUS              PORTS               NAMES
715ebfcee040        busybox                "top"               16 minutes ago      Up 16 minutes                           i_am_nostalgic
d5c976d3c462        busybox                "top"               23 minutes ago      Up 23 minutes                           top
9b6247364a03        busybox                "top"               24 minutes ago      Up 24 minutes                           nostalgic_stallman

To filter for paused containers:

$ docker ps --filter status=paused

CONTAINER ID        IMAGE               COMMAND             CREATED             STATUS                      PORTS               NAMES
673394ef1d4c        busybox             "top"               About an hour ago   Up About an hour (Paused)                       nostalgic_shockley

ancestor

The ancestor filter matches containers based on its image or a descendant of it. The filter supports the following image representation:

  • image
  • image:tag
  • image:tag@digest
  • short-id
  • full-id

If you don't specify a tag, the latest tag is used. For example, to filter for containers that use the latest ubuntu image:

$ docker ps --filter ancestor=ubuntu

CONTAINER ID        IMAGE               COMMAND             CREATED              STATUS              PORTS               NAMES
919e1179bdb8        ubuntu-c1           "top"               About a minute ago   Up About a minute                       admiring_lovelace
5d1e4a540723        ubuntu-c2           "top"               About a minute ago   Up About a minute                       admiring_sammet
82a598284012        ubuntu              "top"               3 minutes ago        Up 3 minutes                            sleepy_bose
bab2a34ba363        ubuntu              "top"               3 minutes ago        Up 3 minutes                            focused_yonath

Match containers based on the ubuntu-c1 image which, in this case, is a child of ubuntu:

$ docker ps --filter ancestor=ubuntu-c1

CONTAINER ID        IMAGE               COMMAND             CREATED              STATUS              PORTS               NAMES
919e1179bdb8        ubuntu-c1           "top"               About a minute ago   Up About a minute                       admiring_lovelace

Match containers based on the ubuntu version 22.04 image:

$ docker ps --filter ancestor=ubuntu:22.04

CONTAINER ID        IMAGE               COMMAND             CREATED              STATUS              PORTS               NAMES
82a598284012        ubuntu:22.04        "top"               3 minutes ago        Up 3 minutes                            sleepy_bose

The following matches containers based on the layer d0e008c6cf02 or an image that have this layer in its layer stack.

$ docker ps --filter ancestor=d0e008c6cf02

CONTAINER ID        IMAGE               COMMAND             CREATED              STATUS              PORTS               NAMES
82a598284012        ubuntu:22.04        "top"               3 minutes ago        Up 3 minutes                            sleepy_bose

Create time

before

The before filter shows only containers created before the container with a given ID or name. For example, having these containers created:

$ docker ps

CONTAINER ID        IMAGE       COMMAND       CREATED              STATUS              PORTS              NAMES
9c3527ed70ce        busybox     "top"         14 seconds ago       Up 15 seconds                          desperate_dubinsky
4aace5031105        busybox     "top"         48 seconds ago       Up 49 seconds                          focused_hamilton
6e63f6ff38b0        busybox     "top"         About a minute ago   Up About a minute                      distracted_fermat

Filtering with before would give:

$ docker ps -f before=9c3527ed70ce

CONTAINER ID        IMAGE       COMMAND       CREATED              STATUS              PORTS              NAMES
4aace5031105        busybox     "top"         About a minute ago   Up About a minute                      focused_hamilton
6e63f6ff38b0        busybox     "top"         About a minute ago   Up About a minute                      distracted_fermat
since

The since filter shows only containers created since the container with a given ID or name. For example, with the same containers as in before filter:

$ docker ps -f since=6e63f6ff38b0

CONTAINER ID        IMAGE       COMMAND       CREATED             STATUS              PORTS               NAMES
9c3527ed70ce        busybox     "top"         10 minutes ago      Up 10 minutes                           desperate_dubinsky
4aace5031105        busybox     "top"         10 minutes ago      Up 10 minutes                           focused_hamilton

volume

The volume filter shows only containers that mount a specific volume or have a volume mounted in a specific path:

$ docker ps --filter volume=remote-volume --format "table {{.ID}}\t{{.Mounts}}"

CONTAINER ID        MOUNTS
9c3527ed70ce        remote-volume

$ docker ps --filter volume=/data --format "table {{.ID}}\t{{.Mounts}}"

CONTAINER ID        MOUNTS
9c3527ed70ce        remote-volume

network

The network filter shows only containers that are connected to a network with a given name or ID.

The following filter matches all containers that are connected to a network with a name containing net1.

$ docker run -d --net=net1 --name=test1 ubuntu top
$ docker run -d --net=net2 --name=test2 ubuntu top

$ docker ps --filter network=net1

CONTAINER ID        IMAGE       COMMAND       CREATED             STATUS              PORTS               NAMES
9d4893ed80fe        ubuntu      "top"         10 minutes ago      Up 10 minutes                           test1

The network filter matches on both the network's name and ID. The following example shows all containers that are attached to the net1 network, using the network ID as a filter:

$ docker network inspect --format "{{.ID}}" net1

8c0b4110ae930dbe26b258de9bc34a03f98056ed6f27f991d32919bfe401d7c5

$ docker ps --filter network=8c0b4110ae930dbe26b258de9bc34a03f98056ed6f27f991d32919bfe401d7c5

CONTAINER ID        IMAGE       COMMAND       CREATED             STATUS              PORTS               NAMES
9d4893ed80fe        ubuntu      "top"         10 minutes ago      Up 10 minutes                           test1

publish and expose

The publish and expose filters show only containers that have published or exposed port with a given port number, port range, and/or protocol. The default protocol is tcp when not specified.

The following filter matches all containers that have published port of 80:

$ docker run -d --publish=80 busybox top
$ docker run -d --expose=8080 busybox top

$ docker ps -a

CONTAINER ID        IMAGE               COMMAND             CREATED             STATUS              PORTS                   NAMES
9833437217a5        busybox             "top"               5 seconds ago       Up 4 seconds        8080/tcp                dreamy_mccarthy
fc7e477723b7        busybox             "top"               50 seconds ago      Up 50 seconds       0.0.0.0:32768->80/tcp   admiring_roentgen

$ docker ps --filter publish=80

CONTAINER ID        IMAGE               COMMAND             CREATED              STATUS              PORTS                   NAMES
fc7e477723b7        busybox             "top"               About a minute ago   Up About a minute   0.0.0.0:32768->80/tcp   admiring_roentgen

The following filter matches all containers that have exposed TCP port in the range of 8000-8080:

$ docker ps --filter expose=8000-8080/tcp

CONTAINER ID        IMAGE               COMMAND             CREATED             STATUS              PORTS               NAMES
9833437217a5        busybox             "top"               21 seconds ago      Up 19 seconds       8080/tcp            dreamy_mccarthy

The following filter matches all containers that have exposed UDP port 80:

$ docker ps --filter publish=80/udp

CONTAINER ID        IMAGE               COMMAND             CREATED             STATUS              PORTS               NAMES

Format the output (--format)

The formatting option (--format) pretty-prints container output using a Go template.

Valid placeholders for the Go template are listed below:

PlaceholderDescription
.IDContainer ID
.ImageImage ID
.CommandQuoted command
.CreatedAtTime when the container was created.
.RunningForElapsed time since the container was started.
.PortsExposed ports.
.StateContainer status (for example; "created", "running", "exited").
.StatusContainer status with details about duration and health-status.
.SizeContainer disk size.
.NamesContainer names.
.LabelsAll labels assigned to the container.
.LabelValue of a specific label for this container. For example '{{.Label "com.docker.swarm.cpu"}}'
.MountsNames of the volumes mounted in this container.
.NetworksNames of the networks attached to this container.

When using the --format option, the ps command will either output the data exactly as the template declares or, when using the table directive, includes column headers as well.

The following example uses a template without headers and outputs the ID and Command entries separated by a colon (:) for all running containers:

$ docker ps --format "{{.ID}}: {{.Command}}"

a87ecb4f327c: /bin/sh -c #(nop) MA
01946d9d34d8: /bin/sh -c #(nop) MA
c1d3b0166030: /bin/sh -c yum -y up
41d50ecd2f57: /bin/sh -c #(nop) MA

To list all running containers with their labels in a table format you can use:

$ docker ps --format "table {{.ID}}\t{{.Labels}}"

CONTAINER ID        LABELS
a87ecb4f327c        com.docker.swarm.node=ubuntu,com.docker.swarm.storage=ssd
01946d9d34d8
c1d3b0166030        com.docker.swarm.node=debian,com.docker.swarm.cpu=6
41d50ecd2f57        com.docker.swarm.node=fedora,com.docker.swarm.cpu=3,com.docker.swarm.storage=ssd

To list all running containers in JSON format, use the json directive:

$ docker ps --format json
{"Command":"\"/docker-entrypoint.…\"","CreatedAt":"2021-03-10 00:15:05 +0100 CET","ID":"a762a2b37a1d","Image":"nginx","Labels":"maintainer=NGINX Docker Maintainers \u003cdocker-maint@nginx.com\u003e","LocalVolumes":"0","Mounts":"","Names":"boring_keldysh","Networks":"bridge","Ports":"80/tcp","RunningFor":"4 seconds ago","Size":"0B","State":"running","Status":"Up 3 seconds"}