docker/dtr install

Estimated reading time: 8 minutes

Install Docker Trusted Registry

Usage

docker run -it --rm docker/dtr \
    install [command options]

Description

This command installs Docker Trusted Registry (DTR) on a node managed by Docker Universal Control Plane (UCP).

After installing DTR, you can join additional DTR replicas using docker/dtr join.

Example Usage

$ docker run -it --rm docker/dtr:2.7.0 install \
	--ucp-node <UCP_NODE_HOSTNAME> \
	--ucp-insecure-tls

Note: Use --ucp-ca "$(cat ca.pem)" instead of --ucp-insecure-tls for a production deployment.

Options

Option Environment Variable Description
--async-nfs $ASYNC_NFS Use async NFS volume options on the replica specified in the --existing-replica-id option. The NFS configuration must be set with --nfs-storage-url explicitly to use this option. Using --async-nfs will bring down any containers on the replica that use the NFS volume, delete the NFS volume, bring it back up with the appropriate configuration, and restart any containers that were brought down.
--client-cert-auth-ca $CLIENT_CA Specify root CA certificates for client authentication with --client-cert-auth-ca "$(cat ca.pem)".
--debug $DEBUG Enable debug mode for additional logs.
--dtr-ca $DTR_CA Use a PEM-encoded TLS CA certificate for DTR. By default DTR generates a self-signed TLS certificate during deployment. You can use your own root CA public certificate with --dtr-ca "$(cat ca.pem)".
--dtr-cert $DTR_CERT Use a PEM-encoded TLS certificate for DTR. By default DTR generates a self-signed TLS certificate during deployment. You can use your own public key certificate with --dtr-cert "$(cat cert.pem)". If the certificate has been signed by an intermediate certificate authority, append its public key certificate at the end of the file to establish a chain of trust.
--dtr-external-url $DTR_EXTERNAL_URL URL of the host or load balancer clients use to reach DTR. When you use this flag, users are redirected to UCP for logging in. Once authenticated they are redirected to the URL you specify in this flag. If you don’t use this flag, DTR is deployed without single sign-on with UCP. Users and teams are shared but users log in separately into the two applications. You can enable and disable single sign-on within your DTR system settings. Format https://host[:port], where port is the value you used with --replica-https-port. Since HSTS (HTTP Strict-Transport-Security) header is included in all API responses, make sure to specify the FQDN (Fully Qualified Domain Name) of your DTR, or your browser may refuse to load the web interface.
--dtr-key $DTR_KEY Use a PEM-encoded TLS private key for DTR. By default DTR generates a self-signed TLS certificate during deployment. You can use your own TLS private key with --dtr-key "$(cat key.pem)".
--dtr-storage-volume $DTR_STORAGE_VOLUME Customize the volume to store Docker images. By default DTR creates a volume to store the Docker images in the local filesystem of the node where DTR is running, without high-availability. Use this flag to specify a full path or volume name for DTR to store images. For high-availability, make sure all DTR replicas can read and write data on this volume. If you’re using NFS, use --nfs-storage-url instead.
--enable-client-cert-auth $ENABLE_CLIENT_CERT_AUTH Enables TLS client certificate authentication; use --enable-client-cert-auth=false to disable it. If enabled, DTR will additionally authenticate users via TLS client certificates. You must also specify the root certificate authorities (CAs) that issued the certificates with --client-cert-auth-ca.
--enable-pprof $DTR_PPROF Enables pprof profiling of the server. Use --enable-pprof=false to disable it. Once DTR is deployed with this flag, you can access the pprof endpoint for the api server at /debug/pprof, and the registry endpoint at /registry_debug_pprof/debug/pprof.
--help-extended $DTR_EXTENDED_HELP Display extended help text for a given command.
--http-proxy $DTR_HTTP_PROXY The HTTP proxy used for outgoing requests.
--https-proxy $DTR_HTTPS_PROXY The HTTPS proxy used for outgoing requests.
--log-host $LOG_HOST The syslog system to send logs to.The endpoint to send logs to. Use this flag if you set --log-protocol to tcp or udp.
--log-level $LOG_LEVEL Log level for all container logs when logging to syslog. Default: INFO. The supported log levels are debug, info, warn, error, or fatal.
--log-protocol $LOG_PROTOCOL The protocol for sending logs. Default is internal. By default, DTR internal components log information using the logger specified in the Docker daemon in the node where the DTR replica is deployed. Use this option to send DTR logs to an external syslog system. The supported values are tcp, udp, or internal. Internal is the default option, stopping DTR from sending logs to an external system. Use this flag with --log-host.
--nfs-storage-url $NFS_STORAGE_URL Use NFS to store Docker images following this format: nfs://<ip|hostname>/<mountpoint>. By default, DTR creates a volume to store the Docker images in the local filesystem of the node where DTR is running, without high availability. To use this flag, you need to install an NFS client library like nfs-common in the node where you’re deploying DTR. You can test this by running showmount -e <nfs-server>. When you join new replicas, they will start using NFS so there is no need to specify this flag. To reconfigure DTR to stop using NFS, leave this option empty: --nfs-storage-url "". See USE NFS for more details.
--nfs-options $NFS_OPTIONS Pass in NFS volume options verbatim for the replica specified in the --existing-replica-id option. The NFS configuration must be set with --nfs-storage-url explicitly to use this option. Specifying --nfs-options will pass in character-for-character the options specified in the argument when creating or recreating the NFS volume. For instance, to use NFS v4 with async, pass in “rw,nfsvers=4,async” as the argument.
--no-proxy $DTR_NO_PROXY List of domains the proxy should not be used for. When using --http-proxy you can use this flag to specify a list of domains that you don’t want to route through the proxy. Format acme.com[, acme.org].
--overlay-subnet $DTR_OVERLAY_SUBNET The subnet used by the dtr-ol overlay network. Example: 10.0.0.0/24. For high-availability, DTR creates an overlay network between UCP nodes. This flag allows you to choose the subnet for that network. Make sure the subnet you choose is not used on any machine where DTR replicas are deployed.
--replica-http-port $REPLICA_HTTP_PORT The public HTTP port for the DTR replica. Default is 80. This allows you to customize the HTTP port where users can reach DTR. Once users access the HTTP port, they are redirected to use an HTTPS connection, using the port specified with --replica-https-port. This port can also be used for unencrypted health checks.
--replica-https-port $REPLICA_HTTPS_PORT The public HTTPS port for the DTR replica. Default is 443. This allows you to customize the HTTPS port where users can reach DTR. Each replica can use a different port.
--replica-id $DTR_INSTALL_REPLICA_ID Assign a 12-character hexadecimal ID to the DTR replica. Random by default.
--replica-rethinkdb-cache-mb $RETHINKDB_CACHE_MB The maximum amount of space in MB for RethinkDB in-memory cache used by the given replica. Default is auto. Auto is (available_memory - 1024) / 2. This config allows changing the RethinkDB cache usage per replica. You need to run it once per replica to change each one.
--ucp-ca $UCP_CA Use a PEM-encoded TLS CA certificate for UCP. Download the UCP TLS CA certificate from https://<ucp-url>/ca, and use --ucp-ca "$(cat ca.pem)".
--ucp-insecure-tls $UCP_INSECURE_TLS Disable TLS verification for UCP. The installation uses TLS but always trusts the TLS certificate used by UCP, which can lead to MITM (man-in-the-middle) attacks. For production deployments, use --ucp-ca "$(cat ca.pem)" instead.
--ucp-node $UCP_NODE The hostname of the UCP node to deploy DTR. Random by default. You can find the hostnames of the nodes in the cluster in the UCP web interface, or by running docker node ls on a UCP manager node.
--ucp-password $UCP_PASSWORD The UCP administrator password.
--ucp-url $UCP_URL The UCP URL including domain and port.
--ucp-username $UCP_USERNAME The UCP administrator username.
dtr, cli, install