docker network connect
Description | Connect a container to a network |
---|---|
Usage | docker network connect [OPTIONS] NETWORK CONTAINER |
Description
Connects a container to a network. You can connect a container by name or by ID. Once connected, the container can communicate with other containers in the same network.
Options
Option | Default | Description |
---|---|---|
--alias | Add network-scoped alias for the container | |
--driver-opt | driver options for the network | |
--ip | IPv4 address (e.g., 172.30.100.104 ) | |
--ip6 | IPv6 address (e.g., 2001:db8::33 ) | |
--link | Add link to another container | |
--link-local-ip | Add a link-local address for the container |
Examples
Connect a running container to a network
$ docker network connect multi-host-network container1
Connect a container to a network when it starts
You can also use the docker run --network=<network-name>
option to start a
container and immediately connect it to a network.
$ docker run -itd --network=multi-host-network busybox
Specify the IP address a container will use on a given network (--ip)
You can specify the IP address you want to be assigned to the container's interface.
$ docker network connect --ip 10.10.36.122 multi-host-network container2
Use the legacy --link
option (--link)
You can use --link
option to link another container with a preferred alias.
$ docker network connect --link container1:c1 multi-host-network container2
Create a network alias for a container (--alias)
--alias
option can be used to resolve the container by another name in the network
being connected to.
$ docker network connect --alias db --alias mysql multi-host-network container2
Set sysctls for a container's interface (--driver-opt)
sysctl
settings that start with net.ipv4.
and net.ipv6.
can be set per-interface
using --driver-opt
label com.docker.network.endpoint.sysctls
. The name of the
interface must be replaced by IFNAME
.
To set more than one sysctl
for an interface, quote the whole value of the
driver-opt
field, remembering to escape the quotes for the shell if necessary.
For example, if the interface to my-net
is given name eth3
, the following example
sets net.ipv4.conf.eth3.log_martians=1
and net.ipv4.conf.eth3.forwarding=0
.
$ docker network connect --driver-opt=\"com.docker.network.endpoint.sysctls=net.ipv4.conf.IFNAME.log_martians=1,net.ipv4.conf.IFNAME.forwarding=0\" multi-host-network container2
Note
Network drivers may restrict the sysctl settings that can be modified and, to protect the operation of the network, new restrictions may be added in the future.
Network implications of stopping, pausing, or restarting containers
You can pause, restart, and stop containers that are connected to a network. A container connects to its configured networks when it runs.
If specified, the container's IP address(es) is reapplied when a stopped
container is restarted. If the IP address is no longer available, the container
fails to start. One way to guarantee that the IP address is available is
to specify an --ip-range
when creating the network, and choose the static IP
address(es) from outside that range. This ensures that the IP address is not
given to another container while this container is not on the network.
$ docker network create --subnet 172.20.0.0/16 --ip-range 172.20.240.0/20 multi-host-network
$ docker network connect --ip 172.20.128.2 multi-host-network container2
To verify the container is connected, use the docker network inspect
command.
Use docker network disconnect
to remove a container from the network.
Once connected in network, containers can communicate using only another
container's IP address or name. For overlay
networks or custom plugins that
support multi-host connectivity, containers connected to the same multi-host
network but launched from different Engines can also communicate in this way.
You can connect a container to one or more networks. The networks need not be the same type. For example, you can connect a single container bridge and overlay networks.