Volumes

Volumes are persistent data stores for containers, created and managed by Docker. You can create a volume explicitly using the docker volume create command, or Docker can create a volume during container or service creation.

When you create a volume, it's stored within a directory on the Docker host. When you mount the volume into a container, this directory is what's mounted into the container. This is similar to the way that bind mounts work, except that volumes are managed by Docker and are isolated from the core functionality of the host machine.

When to use volumes

Volumes are the preferred mechanism for persisting data generated by and used by Docker containers. While bind mounts are dependent on the directory structure and OS of the host machine, volumes are completely managed by Docker. Volumes are a good choice for the following use cases:

Volumes are easier to back up or migrate than bind mounts.
You can manage volumes using Docker CLI commands or the Docker API.
Volumes work on both Linux and Windows containers.
Volumes can be more safely shared among multiple containers.
New volumes can have their content pre-populated by a container or build.
When your application requires high-performance I/O.

Volumes are not a good choice if you need to access the files from the host, as the volume is completely managed by Docker. Use bind mounts if you need to access files or directories from both containers and the host.

Volumes are often a better choice than writing data directly to a container, because a volume doesn't increase the size of the containers using it. Using a volume is also faster; writing into a container's writable layer requires a storage driver to manage the filesystem. The storage driver provides a union filesystem, using the Linux kernel. This extra abstraction reduces performance as compared to using volumes, which write directly to the host filesystem.

If your container generates non-persistent state data, consider using a tmpfs mount to avoid storing the data anywhere permanently, and to increase the container's performance by avoiding writing into the container's writable layer.

Volumes use rprivate bind propagation, and bind propagation isn't configurable for volumes.

A volume's lifecycle

A volume's contents exist outside the lifecycle of a given container. When a container is destroyed, the writable layer is destroyed with it. Using a volume ensures that the data is persisted even if the container using it is removed.

A given volume can be mounted into multiple containers simultaneously. When no running container is using a volume, the volume is still available to Docker and isn't removed automatically. You can remove unused volumes using docker volume prune.

Mounting a volume over existing data

If you mount a non-empty volume into a directory in the container in which files or directories exist, the pre-existing files are obscured by the mount. This is similar to if you were to save files into /mnt on a Linux host, and then mounted a USB drive into /mnt. The contents of /mnt would be obscured by the contents of the USB drive until the USB drive was unmounted.

With containers, there's no straightforward way of removing a mount to reveal the obscured files again. Your best option is to recreate the container without the mount.

If you mount an empty volume into a directory in the container in which files or directories exist, these files or directories are propagated (copied) into the volume by default. Similarly, if you start a container and specify a volume which does not already exist, an empty volume is created for you. This is a good way to pre-populate data that another container needs.

To prevent Docker from copying a container's pre-existing files into an empty volume, use the volume-nocopy option, see Options for --mount.

Named and anonymous volumes

A volume may be named or anonymous. Anonymous volumes are given a random name that's guaranteed to be unique within a given Docker host. Just like named volumes, anonymous volumes persist even if you remove the container that uses them, except if you use the --rm flag when creating the container, in which case the anonymous volume associated with the container is destroyed. See Remove anonymous volumes.

If you create multiple containers consecutively that each use anonymous volumes, each container creates its own volume. Anonymous volumes aren't reused or shared between containers automatically. To share an anonymous volume between two or more containers, you must mount the anonymous volume using the random volume ID.

Syntax

To mount a volume with the docker run command, you can use either the --mount or --volume flag.

$ docker run --mount type=volume,src=<volume-name>,dst=<mount-path>
$ docker run --volume <volume-name>:<mount-path>

In general, --mount is preferred. The main difference is that the --mount flag is more explicit and supports all the available options.

You must use --mount if you want to:

Specify volume driver options
Mount a volume subdirectory
Mount a volume into a Swarm service

Options for --mount

The --mount flag consists of multiple key-value pairs, separated by commas and each consisting of a <key>=<value> tuple. The order of the keys isn't significant.

$ docker run --mount type=volume[,src=<volume-name>],dst=<mount-path>[,<key>=<value>...]

Valid options for --mount type=volume include:

Option	Description
`source`, `src`	The source of the mount. For named volumes, this is the name of the volume. For anonymous volumes, this field is omitted.
`destination`, `dst`, `target`	The path where the file or directory is mounted in the container.
`volume-subpath`	A path to a subdirectory within the volume to mount into the container. The subdirectory must exist in the volume before the volume is mounted to a container. See Mount a volume subdirectory.
`readonly`, `ro`	If present, causes the volume to be mounted into the container as read-only.
`volume-nocopy`	If present, data at the destination isn't copied into the volume if the volume is empty. By default, content at the target destination gets copied into a mounted volume if empty.
`volume-opt`	Can be specified more than once, takes a key-value pair consisting of the option name and its value.

Example

$ docker run --mount type=volume,src=myvolume,dst=/data,ro,volume-subpath=/foo

Options for --volume

The --volume or -v flag consists of three fields, separated by colon characters (:). The fields must be in the correct order.

$ docker run -v [<volume-name>:]<mount-path>[:opts]

In the case of named volumes, the first field is the name of the volume, and is unique on a given host machine. For anonymous volumes, the first field is omitted. The second field is the path where the file or directory is mounted in the container.

The third field is optional, and is a comma-separated list of options. Valid options for --volume with a data volume include:

Option	Description
`readonly`, `ro`	If present, causes the volume to be mounted into the container as read-only.
`volume-nocopy`	If present, data at the destination isn't copied into the volume if the volume is empty. By default, content at the target destination gets copied into a mounted volume if empty.

Example

$ docker run -v myvolume:/data:ro

Create and manage volumes

Unlike a bind mount, you can create and manage volumes outside the scope of any container.

Create a volume:

$ docker volume create my-vol

List volumes:

$ docker volume ls

local               my-vol

Inspect a volume:

$ docker volume inspect my-vol
[
    {
        "Driver": "local",
        "Labels": {},
        "Mountpoint": "/var/lib/docker/volumes/my-vol/_data",
        "Name": "my-vol",
        "Options": {},
        "Scope": "local"
    }
]

Remove a volume:

$ docker volume rm my-vol

Start a container with a volume

If you start a container with a volume that doesn't yet exist, Docker creates the volume for you. The following example mounts the volume myvol2 into /app/ in the container.

The following -v and --mount examples produce the same result. You can't run them both unless you remove the devtest container and the myvol2 volume after running the first one.

$ docker run -d \
  --name devtest \
  --mount source=myvol2,target=/app \
  nginx:latest

$ docker run -d \
  --name devtest \
  -v myvol2:/app \
  nginx:latest

Use docker inspect devtest to verify that Docker created the volume and it mounted correctly. Look for the Mounts section:

"Mounts": [
    {
        "Type": "volume",
        "Name": "myvol2",
        "Source": "/var/lib/docker/volumes/myvol2/_data",
        "Destination": "/app",
        "Driver": "local",
        "Mode": "",
        "RW": true,
        "Propagation": ""
    }
],

This shows that the mount is a volume, it shows the correct source and destination, and that the mount is read-write.

Stop the container and remove the volume. Note volume removal is a separate step.

$ docker container stop devtest

$ docker container rm devtest

$ docker volume rm myvol2

Use a volume with Docker Compose

The following example shows a single Docker Compose service with a volume:

services:
  frontend:
    image: node:lts
    volumes:
      - myapp:/home/node/app
volumes:
  myapp:

Running docker compose up for the first time creates a volume. Docker reuses the same volume when you run the command subsequently.

You can create a volume directly outside of Compose using docker volume create and then reference it inside compose.yaml as follows:

services:
  frontend:
    image: node:lts
    volumes:
      - myapp:/home/node/app
volumes:
  myapp:
    external: true

For more information about using volumes with Compose, refer to the Volumes section in the Compose specification.

Start a service with volumes

When you start a service and define a volume, each service container uses its own local volume. None of the containers can share this data if you use the local volume driver. However, some volume drivers do support shared storage.

The following example starts an nginx service with four replicas, each of which uses a local volume called myvol2.

$ docker service create -d \
  --replicas=4 \
  --name devtest-service \
  --mount source=myvol2,target=/app \
  nginx:latest

Use docker service ps devtest-service to verify that the service is running:

$ docker service ps devtest-service

ID                  NAME                IMAGE               NODE                DESIRED STATE       CURRENT STATE            ERROR               PORTS
4d7oz1j85wwn        devtest-service.1   nginx:latest        moby                Running             Running 14 seconds ago

You can remove the service to stop the running tasks:

$ docker service rm devtest-service

Removing the service doesn't remove any volumes created by the service. Volume removal is a separate step.

Populate a volume using a container

If you start a container which creates a new volume, and the container has files or directories in the directory to be mounted such as /app/, Docker copies the directory's contents into the volume. The container then mounts and uses the volume, and other containers which use the volume also have access to the pre-populated content.

To show this, the following example starts an nginx container and populates the new volume nginx-vol with the contents of the container's /usr/share/nginx/html directory. This is where Nginx stores its default HTML content.

The --mount and -v examples have the same end result.

$ docker run -d \
  --name=nginxtest \
  --mount source=nginx-vol,destination=/usr/share/nginx/html \
  nginx:latest

$ docker run -d \
  --name=nginxtest \
  -v nginx-vol:/usr/share/nginx/html \
  nginx:latest

After running either of these examples, run the following commands to clean up the containers and volumes. Note volume removal is a separate step.

$ docker container stop nginxtest

$ docker container rm nginxtest

$ docker volume rm nginx-vol

Use a read-only volume

For some development applications, the container needs to write into the bind mount so that changes are propagated back to the Docker host. At other times, the container only needs read access to the data. Multiple containers can mount the same volume. You can simultaneously mount a single volume as read-write for some containers and as read-only for others.

The following example changes the previous one. It mounts the directory as a read-only volume, by adding ro to the (empty by default) list of options, after the mount point within the container. Where multiple options are present, you can separate them using commas.

The --mount and -v examples have the same result.

$ docker run -d \
  --name=nginxtest \
  --mount source=nginx-vol,destination=/usr/share/nginx/html,readonly \
  nginx:latest

$ docker run -d \
  --name=nginxtest \
  -v nginx-vol:/usr/share/nginx/html:ro \
  nginx:latest

Use docker inspect nginxtest to verify that Docker created the read-only mount correctly. Look for the Mounts section:

"Mounts": [
    {
        "Type": "volume",
        "Name": "nginx-vol",
        "Source": "/var/lib/docker/volumes/nginx-vol/_data",
        "Destination": "/usr/share/nginx/html",
        "Driver": "local",
        "Mode": "",
        "RW": false,
        "Propagation": ""
    }
],

Stop and remove the container, and remove the volume. Volume removal is a separate step.

$ docker container stop nginxtest

$ docker container rm nginxtest

$ docker volume rm nginx-vol

Mount a volume subdirectory

When you mount a volume to a container, you can specify a subdirectory of the volume to use, with the volume-subpath parameter for the --mount flag. The subdirectory that you specify must exist in the volume before you attempt to mount it into a container; if it doesn't exist, the mount fails.

Specifying volume-subpath is useful if you only want to share a specific portion of a volume with a container. Say for example that you have multiple containers running and you want to store logs from each container in a shared volume. You can create a subdirectory for each container in the shared volume, and mount the subdirectory to the container.

The following example creates a logs volume and initiates the subdirectories app1 and app2 in the volume. It then starts two containers and mounts one of the subdirectories of the logs volume to each container. This example assumes that the processes in the containers write their logs to /var/log/app1 and /var/log/app2.

$ docker volume create logs
$ docker run --rm \
  --mount src=logs,dst=/logs \
  alpine mkdir -p /logs/app1 /logs/app2
$ docker run -d \
  --name=app1 \
  --mount src=logs,dst=/var/log/app1/,volume-subpath=app1 \
  app1:latest
$ docker run -d \
  --name=app2 \
  --mount src=logs,dst=/var/log/app2,volume-subpath=app2 \
  app2:latest

With this setup, the containers write their logs to separate subdirectories of the logs volume. The containers can't access the other container's logs.

When building fault-tolerant applications, you may need to configure multiple replicas of the same service to have access to the same files.

There are several ways to achieve this when developing your applications. One is to add logic to your application to store files on a cloud object storage system like Amazon S3. Another is to create volumes with a driver that supports writing files to an external storage system like NFS or Amazon S3.

Volume drivers let you abstract the underlying storage system from the application logic. For example, if your services use a volume with an NFS driver, you can update the services to use a different driver. For example, to store data in the cloud, without changing the application logic.

Use a volume driver

When you create a volume using docker volume create, or when you start a container which uses a not-yet-created volume, you can specify a volume driver. The following examples use the vieux/sshfs volume driver, first when creating a standalone volume, and then when starting a container which creates a new volume.

Note
If your volume driver accepts a comma-separated list as an option, you must escape the value from the outer CSV parser. To escape a volume-opt, surround it with double quotes (") and surround the entire mount parameter with single quotes (').
For example, the local driver accepts mount options as a comma-separated list in the o parameter. This example shows the correct way to escape the list.
$ docker service create \
 --mount 'type=volume,src=<VOLUME-NAME>,dst=<CONTAINER-PATH>,volume-driver=local,volume-opt=type=nfs,volume-opt=device=<nfs-server>:<nfs-path>,"volume-opt=o=addr=<nfs-address>,vers=4,soft,timeo=180,bg,tcp,rw"'
 --name myservice \
 <IMAGE>

Initial setup

The following example assumes that you have two nodes, the first of which is a Docker host and can connect to the second node using SSH.

On the Docker host, install the vieux/sshfs plugin:

$ docker plugin install --grant-all-permissions vieux/sshfs

Create a volume using a volume driver

This example specifies an SSH password, but if the two hosts have shared keys configured, you can exclude the password. Each volume driver may have zero or more configurable options, you specify each of them using an -o flag.

$ docker volume create --driver vieux/sshfs \
  -o sshcmd=test@node2:/home/test \
  -o password=testpassword \
  sshvolume

Start a container which creates a volume using a volume driver

The following example specifies an SSH password. However, if the two hosts have shared keys configured, you can exclude the password. Each volume driver may have zero or more configurable options.

Note
If the volume driver requires you to pass any options, you must use the --mount flag to mount the volume, and not -v.

$ docker run -d \
  --name sshfs-container \
  --mount type=volume,volume-driver=vieux/sshfs,src=sshvolume,target=/app,volume-opt=sshcmd=test@node2:/home/test,volume-opt=password=testpassword \
  nginx:latest

Create a service which creates an NFS volume

The following example shows how you can create an NFS volume when creating a service. It uses 10.0.0.10 as the NFS server and /var/docker-nfs as the exported directory on the NFS server. Note that the volume driver specified is local.

NFSv3

$ docker service create -d \
  --name nfs-service \
  --mount 'type=volume,source=nfsvolume,target=/app,volume-driver=local,volume-opt=type=nfs,volume-opt=device=:/var/docker-nfs,volume-opt=o=addr=10.0.0.10' \
  nginx:latest

NFSv4

$ docker service create -d \
    --name nfs-service \
    --mount 'type=volume,source=nfsvolume,target=/app,volume-driver=local,volume-opt=type=nfs,volume-opt=device=:/var/docker-nfs,"volume-opt=o=addr=10.0.0.10,rw,nfsvers=4,async"' \
    nginx:latest

Create CIFS/Samba volumes

You can mount a Samba share directly in Docker without configuring a mount point on your host.

$ docker volume create \
	--driver local \
	--opt type=cifs \
	--opt device=//uxxxxx.your-server.de/backup \
	--opt o=addr=uxxxxx.your-server.de,username=uxxxxxxx,password=*****,file_mode=0777,dir_mode=0777 \
	--name cif-volume

The addr option is required if you specify a hostname instead of an IP. This lets Docker perform the hostname lookup.

Block storage devices

You can mount a block storage device, such as an external drive or a drive partition, to a container. The following example shows how to create and use a file as a block storage device, and how to mount the block device as a container volume.

Important
The following procedure is only an example. The solution illustrated here isn't recommended as a general practice. Don't attempt this approach unless you're confident about what you're doing.

How mounting block devices works

Under the hood, the --mount flag using the local storage driver invokes the Linux mount syscall and forwards the options you pass to it unaltered. Docker doesn't implement any additional functionality on top of the native mount features supported by the Linux kernel.

If you're familiar with the Linux mount command, you can think of the --mount options as forwarded to the mount command in the following manner:

$ mount -t <mount.volume-opt.type> <mount.volume-opt.device> <mount.dst> -o <mount.volume-opts.o>

To explain this further, consider the following mount command example. This command mounts the /dev/loop5 device to the path /external-drive on the system.

$ mount -t ext4 /dev/loop5 /external-drive

The following docker run command achieves a similar result, from the point of view of the container being run. Running a container with this --mount option sets up the mount in the same way as if you had executed the mount command from the previous example.

$ docker run \
  --mount='type=volume,dst=/external-drive,volume-driver=local,volume-opt=device=/dev/loop5,volume-opt=type=ext4'

You can't run the mount command inside the container directly, because the container is unable to access the /dev/loop5 device. That's why the docker run command uses the --mount option.

Example: Mounting a block device in a container

The following steps create an ext4 filesystem and mounts it into a container. The filesystem support of your system depends on the version of the Linux kernel you are using.

Create a file and allocate some space to it:
$ fallocate -l 1G disk.raw
Build a filesystem onto the disk.raw file:
$ mkfs.ext4 disk.raw
Create a loop device:
$ losetup -f --show disk.raw /dev/loop5
Note
losetup creates an ephemeral loop device that's removed after system reboot, or manually removed with losetup -d.
Run a container that mounts the loop device as a volume:
$ docker run -it --rm \ --mount='type=volume,dst=/external-drive,volume-driver=local,volume-opt=device=/dev/loop5,volume-opt=type=ext4' \ ubuntu bash
When the container starts, the path /external-drive mounts the disk.raw file from the host filesystem as a block device.
When you're done, and the device is unmounted from the container, detach the loop device to remove the device from the host system:
$ losetup -d /dev/loop5

Back up, restore, or migrate data volumes

Volumes are useful for backups, restores, and migrations. Use the --volumes-from flag to create a new container that mounts that volume.

Back up a volume

For example, create a new container named dbstore:

$ docker run -v /dbdata --name dbstore ubuntu /bin/bash

In the next command:

Launch a new container and mount the volume from the dbstore container
Mount a local host directory as /backup
Pass a command that tars the contents of the dbdata volume to a backup.tar file inside the /backup directory.

$ docker run --rm --volumes-from dbstore -v $(pwd):/backup ubuntu tar cvf /backup/backup.tar /dbdata

When the command completes and the container stops, it creates a backup of the dbdata volume.

Restore volume from a backup

With the backup just created, you can restore it to the same container, or to another container that you created elsewhere.

For example, create a new container named dbstore2:

$ docker run -v /dbdata --name dbstore2 ubuntu /bin/bash

Then, un-tar the backup file in the new container’s data volume:

$ docker run --rm --volumes-from dbstore2 -v $(pwd):/backup ubuntu bash -c "cd /dbdata && tar xvf /backup/backup.tar --strip 1"

You can use these techniques to automate backup, migration, and restore testing using your preferred tools.

Remove volumes

A Docker data volume persists after you delete a container. There are two types of volumes to consider:

Named volumes have a specific source from outside the container, for example, awesome:/bar.
Anonymous volumes have no specific source. Therefore, when the container is deleted, you can instruct the Docker Engine daemon to remove them.

Remove anonymous volumes

To automatically remove anonymous volumes, use the --rm option. For example, this command creates an anonymous /foo volume. When you remove the container, the Docker Engine removes the /foo volume but not the awesome volume.

$ docker run --rm -v /foo -v awesome:/bar busybox top

Note
If another container binds the volumes with --volumes-from, the volume definitions are copied and the anonymous volume also stays after the first container is removed.

Remove all volumes

To remove all unused volumes and free up space:

$ docker volume prune

Next steps

Learn about bind mounts.
Learn about tmpfs mounts.
Learn about storage drivers.
Learn about third-party volume driver plugins.